80-1motor-driven centrifugal precipitating instrument is used to perform quantitative analysis in laboratory as well as for medical personnel to flood and urine. Without it, these kinds of work can not be done smoothly.

Technique data

1.      Centrifugal power: 1790g

2.      Rotational speed :0-4000 revolutions/minute

3.      Capacity: 20ml×6

4.      Preconcentration:0-60minutes,freee selection

5.      Power: 25w

6.      Volume: 280×250×240mm

7.      Weight: 6kg

8.       Voltage: 220V 50HZ

Using method

1:When using, it should be layer on even and stable.

2.The tolerance of relative weight of loaded balance should not be more than 0.5g.

3.Plastic protective tube should be cleaned with cloth after using to prevent corrosion, when cleaning and sterilizing, temperature should not be more than 50℃.

4.After connecting with mains, adjust work time and revolve the knob from “0”to needed rotation speed clockwise.

Maintenance and precautions

1.      Electrical machinery should be poured into lubricating oil every 3 months.

2.      It should be kept in dried room when not be used.

3.      If the carbonate brush is less than 10mm after being used for long time, it should be changed for a new one.

4.      Plug and socket should be well connected with earth.

5.      The weight of the test tube and the tube cover should be equal. They can’t be used if they are different in weight.

Firmly resist inferior products allow customers to buy the rest assured that with the comfortable! ! !