FTJ-301A全封闭自动组织脱水机

主要用途：

   FTJ-301A全封闭自动组织脱水机用于生物组织常规切片制作的脱水阶段，能按预先设定的工作程序进行全自动的组织脱水工作，大量节省操作人员的工作时间，提高工作效率和工作质量。该产品主要用于的病例诊断、医科院校的教学和生物医学研究机构等单位。全封闭脱水机打破传统的脱水模式，组织始终处于处理缸中，试剂和组织始终处于封闭状态，环保、安全是脱水机的发展趋势。

    该产品是利用液体泵将处理缸抽真空，使溶剂被吸入处理缸对组织进行脱水，通过电器控制旋转电磁阀，依次经过10种处理液对组织脱水，然后经过3次石蜡浸入，后经过3中溶剂的清洗完成整个脱水过程。电器部分采用人工控机控制，触摸屏显示，高级语言编程，人机界面友好，操作简单易学，有多套处理程序和清洗程序可供选择，处理过程实时地动画显示，清晰明了。

    The product is used for making conventional sections of biological tissue dewatering stage, full automatic tissue dehydration work according to the preset working procedure and save a lot of working hours of operation personnel, improve the efficiency and quality of work. This product is mainly used in the case diagnosis of the hospital, medical colleges and universities teaching and biomedical research institutions and other units. Fully enclosed dewatering machine breaks the traditional mode of dehydration, the organization is always in the treatment of the cylinder, the reagent and the organization is always in a closed state, environmental protection, safety is the development trend of the dewatering machine.

    The product is using liquid pump will handle the cylinder vacuum, solvent is sucked into the cylinder of tissue dehydration, according to the electrical control rotary solenoid valve, followed by 10 kinds of treatment solution for dehydration of tissue and immersed in paraffin after three times, finally after 3 solvent cleaning to completed the whole process of desiccation. Electrical part adopts manual control machine control, touch screen display, high-level language programming, friendly man-machine interface, easy and simple operation, multiple sets of processing and cleaning procedures for selection and processing of real-time animation display, clarity.

主要性能特点
1.采用嵌入式系统为主控制单元，程序化程度高，工作稳定，菜单结构合理；
2.手动模式中动态演示换液过程，清晰明了；
3.触摸式液晶屏显示，美观实用；
4.可预存多套程序，调入方便，更改简单，自动排序；
5.程序预约工作时间可任意设定，比传统延时设置扩大了设置范围；
6.任意溶剂处理过程可自由选择正压、负压或交替加快处理进程；
7.醋缸加热采用数字控制，温控程序高，304不锈钢材质，耐腐蚀。

【Main performance characteristic】
1.The embedding system,for main control unit,it provides high degree of routinization and stability work,rhe logical structure;
2.It clearly to see the procedure of the dynamic process manually;
3.Big LCD screen display and touch key-press;
4.It can be stored of numbers of program,it convenient to adjust,change and order the program automatically;
5.Working time of process reservation can be free set,it is expand the scopeof the setting than the traditional delay setting;
6.It free to select barotropy and negative pressure process or expedit the dealing procedure alternation for any dealing procedure of regent;
7.Digital control for wax cylinder heating,high degree of temperature control,the stainless steel with good function of corrosion resisting.

技术指标

1.额定电压：AC 220V±22V 50Hz±1Hz；
2.额定功率：1400VA
3.脱水缸数量：10个，容量：4.5L；
4.脱水缸温度：环境温度~99℃；
5.脱水缸温控精度：±5℃；
6.试剂容量数量：14个（其中3个清洗液，1个废液回收，10个处理液）4L/个；
7.石蜡容器：数量3个，每个容量3L；
8.石蜡缸温度：环境温度～99℃；
9.石蜡缸温控精度：±5℃；
10.样本蓝：3个，处理量350块；
11.活性炭过滤容器：1个；
12.自动装液及抽排系统：用于试剂盒石蜡；
13.操作程序：可储存十个以上；
14.清洁循环程序：3个（用户可改编）；
15.手动程序：单个试剂执行；
16.自动程序：针对不同组织任意设定；
17.石蜡温度范围：环境温度到99℃任意设定（初始设定65℃）；
18.试剂温度范围：环境温度到99℃任意设定（初始设定45℃）；
19.外形尺寸：600mm*676mm*1340mm
20.整机重量：85kg。

【FTJ-301A AUTOMATIC TISSUE PROCESSOR】
Technique Parameter:
1.Voltage rating:AC 220V±22V 50Hz±1Hz；
2.Power rating:1400VA;
3.Dehydrate cylinder Quantity:10,Capacity:4.5L;
4.Dehydrate cylinder temperature:Environment temperature-99℃;
5.Dehydrate cylinder temperature controlling accuracy:±5℃；
6.Reagent container No.Quantity:14(clening fluid:3,waste lquor recovery:1,treating fluid:10)4L/each one;
7.Olefin container Quantity:3,each Capacity:3L;
8.Olefin cylinder temperature:Room temperature-99℃；
9.Olefin cylinder temperature controlling accuracy:±5℃；
10.Sample basket:3,Each can accommodate a sample of 350;
11.Active carbon filtrate container:1;
12.Fluid automaticacally and a platoon system Used by reagent and olefin;
13.Operating programme:It can be storage over ten;
14.Cleanliness cycle programme:3(can be revise bu the user);
15.Manual programme:operatul for seppecial reagent;
16.Auto programme:set for different tissue when weed;
17.Temperature range of olefin:Room temperature to 99℃ freesetting(at the beginning of setting is 65℃);
18.Temperature range of reagent:Room temperature to 99℃ freesetting(at the beginning of setting is 45℃);
19.Outer Dimension:600mm*676mm*1340mm;
20.Weight of the whole machine:85kg.