起订量:
Hi Flow 甲烷漏失率测量仪
免费会员
经销商北京宏昌信科技有限公司是一家集气体检测仪器,水质检测仪器的专业代理商,公司致力于引进国外*的气体分析仪器设备、水质检测设备、室内环境检测设备及应急检测设备提供给国内用户,公司代理的仪器广泛适用于*、航天、电力、化工、环保等行业以及科研部门,教学院校,环境监测站等。
公司成立以来,通过公司全体员工的同心协力,凭借公司员工对行业仪器设备的了解、以及代理产品令人信服的品质及服务质量,树立了良好的口碑。与上述主要行业企业建立了稳固而可信赖的业务联系。
公司主要产品有:气体检测仪、气体分析仪、烟气分析仪、水质检测仪,室内空气质量检测仪,露点仪等。
主要代理厂家有 :美国华瑞气体检测仪,法国奥德姆公司的气体检测仪,英思科气体检测仪,TSI环境检测仪。
The Hi Flow® Sampler is designed to measure the rate of gas leakage around various pipe fittings, valve packings, and compressor seals found in natural gas transmission, storage, and compressor facilities. This is accomplished by sampling at a very large flow rate (8 to 10 SCFM) to compley capture any gas leaking from the component. Then by accuray measuring the flow rate of the sampling stream and the natural gas concentration, it is possible to calculate the rate of the gas leak.
We at Bacharach are very excited about our partnership with the Gas Technology Institute in the commercialization of their patented Hi Flow Sampler. Many changes and enhancements have been made from the original instrument including: intrinsic safety, data logging, and instantaneous leak-rate display just to name a few.
Specifications:
Measured Values:
Gas sample flow rate
Background gas concentration
Sample gas concentration
Calculated Values:
Leak rate of component under test
Leak concentration corrected for background
Measurable Leak Rate: 0.05 to 8.00 SCFM
Accuracy of Calculated Leak Rate: ±10%
Sampling Flow Rate: 10.5 SCFM maximum (297 LPM) at full battery charge
Memory: Stores up to 1000 individual test parameters
Natural Gas Sensor:
Detection Method: Catalytic oxidation / Thermal conductivity
Range: 0 to 5% methane, catalytic; 5 to methane, thermal
Accuracy: ±5% of reading or 0.02% methane, whichever is greater
Battery:
Type: NiMH rechargeable pack
Voltate: 5.5V max.
Recharge Time: 8 to 10 hours
Run Time: >4.5 hours continuous at 68°F
Operating Temperature: 32 to 122°F
Measurement Method: Differential pressure across restriction
Dimensions: 18 x 12 x 7 inches
Weight: 20 lb
Agency Approvals:
Designed to be intrinsically safe for use in hazardous locations, Class I, Division 1, Groups A, B, C & D in North America
CAN/CSA-C22.2 No. 157 (June 1992)
ANSI (June 27, 2002)/UL913-2002
CE Mark