燃气油加热器
Fuel gas oil temp control unit(Fuel gas heat conducting oil furnace)
特 点
Features
节能省电，运行成本低；无须复杂的水处理设备，节约水资源，可替代水资源分
缺地区以水为介质的锅炉供热。
Save energy, low running costs, do not need complex water treatment
equipment, save water resource, can alternative water heating boiler
in water resource sub-shortage areas.
控温精确：供热稳定，可进行精确的温度调节，自动化程序高。
Precise temperature control; stable heating, precise temperature
adjustment, automation.
热效率高：采用闭路循环供热，无废热排放，负荷适应性好，在不同工况条件下
均能保持热效率，综合热利用效率较高。
High thermal efficiency; closed-cycle heating, no waste heat emission,
load adaptability, can maintain op0timum thermal efficiency under
different conditions, high integrated thermal utilization efficiency.
安全可靠：具有完备的运行控制和安全监控装置。供热系统开口运行，安全系数高。
Safe and reliable: complete operating control and safety monitoring device.
Heating system runs Opening, high safety factor.
高温低压：能在较低的运行压力下，获得较高的工作温度。
High-temp and low pressure: can obtain a higher working temperature under
lower operating pressure.
选用国际燃烧器和*的全自动控制系统使锅炉燃烧更稳定、操作更方、
运行更安全可靠。
Well-known international brａnd burners and advanced automatic control system,
the boiler combustion more stable, operation more convenient, safe and reliable.
炉膛采用双密排盘tp0，受热面布置充足，降低管子表面热负荷，合导热油使用更安全。
Furnace with double row pipe, heating surface is sufficient to reduce the heat
load of the pipe surface, the Heat-conducting oil use safe.
介质流程合理，导热油由低（进口）至高（出口），运行产生的气体很难在炉内停留，
可方便地排出系统。
Reasonable medium flow, thermal oil from the low (inlet) to high (outlet),
generated gas can not stay in the furnace, the system can be easily discharged it.
炉膛尺寸与燃烧火焰相匹配，采用了正压燃烧，辐射换热交率高。
The furnace size matches with the burning flame, positive pressure combustion
increase the radiation heat transfer efficiency.