零空气发生器

首页>实验室仪器设备-热搜分类>气体发生器|气体处理装置>空气发生器

零空气发生器 零空气发生器

型号
零空气发生器

该企业相似产品

氮气发生器(膜型)

在线询价

超高压氮气发生器

在线询价

气体发生器

在线询价

**气体发生器(红外光谱)

在线询价

TOC 气体发生器

在线询价

K2001微量氮气分析仪

在线询价
上海美盛自动化设备有限公司始创于2008年,公司主要经营产品:1,自控和工程2,环保监测设备和工业安全防爆设备3,实验室和在线分析产品4,医药化工食品设备工程(制药机械,水处理设备,压力容器设备的加工生产以及工程安装)5,电子半导体设备工程(无尘无菌室工程设计施工,机电工程,仪器仪表)6,工业和民用消防工程(Honeywell,Protectwell,esser,ansul,tyco,vesda等)公司的办公地址位于上海市闵行区莘庄工业商务区。公司自创办以来,一直致力服务于石油,石化,天然气,电力,水泥,煤化工,以及医药化工,电子半导体,食品等行业,同时为各行业提供综合服务,通过**的非标生产制造技术,高标准的设备以及工程设计丰富的施工经验获得了拥护的赞誉。在环境分析仪器和工业安全火气监控设备方面主要的产品有:粉尘分析仪,火焰检测器,火花探测器,高纯特气在线分析,微量氧分析,工业CEMS烟气分析系统,以及供气式呼吸防护产品,过滤式呼吸防护产品,头脸眼耳手足防护产品,身体和跌落防护产品,便携式气体检测仪,固定式气体检测仪,消防设备,环境检测产品等。在实验室和工业分析检测设备方面的产品有:实验室分析仪器,过程检测系统,产品检测设备,商用衡器工业称重和系统等。在医药化工食品设备工程方面的主要产品有:医药化工,石油化工设备安装施工,低压配电装置,工业自动化仪表,主导产品为各种反应釜,电加热釜,换热器,不锈钢输送机,储罐,计量罐,过滤器,薄膜蒸发器,真空罐,发酵罐,层析柱,配液罐,多效蒸馏水机,纯蒸汽发生器,冷冻千燥机,乳化机,全自动纯水制备系统,全自动CIP在线清洗系统,不锈钢管道,阀门以及配件,卫生型水泵,过滤器,呼吸器,卫生级不锈钢制品,符合CGMP/FDA/TGA要求认证的医药化工设备。在电子半导体设备工程方面主要的产品有:机电设备供应和工程安装,无尘无菌室工程设计施工,洁净管道,暖通空调,洁净室,自动化控制设备,采购管理,施工安装,调试以及验证服务等。上海美盛自动化设备有限公司是贸易公司,康洛吉自动化系统工程(上海)有限公司是工程公司,两家公司是兄弟公司。PROFESSIONAL专业TECHNOLOGY技术INNOVATION**SERVICE服务

详细信息

零空气发生器
性能和益处:
1,代替了代价高昂的危险气瓶
2,显著地节省气瓶
3,安装简单,无特殊要求
4,*的控制和安全系统的自动转换开关
5,满足所有的标准和法规

Zero-Air-Generators

Features & Benefits

  • Eliminates costly dangerous gas cylinders
  • Significant savings over cylinders
  • Simple installation, no special requirements
  • Constant purity with no fall off in performance
  • Sophisticated control and safety system with automatic changeover switch
  • Meets all standards and regulations

Technical Details

For GC-FID there are six new models in the SMART series to produce zero air of the highest possible purity from compressed air. All models are absolutely noiseless and easy to install. The generators continously produce zero-air with hydrocarbon content < 0,1 ppm (measured as methane). They cover requirements for zero-air for up to 160 FID´s at outlet pressures between 2 bar and 10 bar. Using modern filter technology to remove particles, water and oil-vapors, the generator works with your compressed air. The catalytical chamber stage than removes disturbing traces of hydrocarbon. Maximum air flow rate, gas/air supply, required temperature in the reactor and electrical requirements are checked and supervised continiously. If there is a fault or crossover of the critical values an alarm is given immediately via relays corresponding to ISO 9000. If the generators detect a fault they automatically switch over to back-up gas cylinders or cut off the gas delivery to the lab. The user can then eliminate the fault and reset the alarm. Even the biggest model delivers up to 50 l/min zero air of constant high purity, within 10 minutes of starting.



Benefits

  • Absolutely even base line in the apparatus, with practically no peaks.
  • Highest possible gas quality equivalent to UHP-gases; significant savings over gas cylinders.
  • Low inlet air pressure allows the generator to be located at point of use in the lab, i.e. where the pure gases are needed.
  • Enourmous saving of space and time.
  • Automatic switchover to back-up-cylinders when a fault is detected by the system.

Compressed air supply

All models of the SMART series are available with an external low noise and oil-less air compressor for permanent use (< 55 dbA).


Type ZA 2000 ZA 4000 ZA 7500 ZA 20 K ZA 35 K ZA 50 K
Max. Air Flow Rate (ml/min) 2000 4000 7500 20000 35000 50000
Max. Inlet Hydrocarbon Concentr. 100 ppm (as CH4)
Outlet Hydrocarbon Concentration < 0,1 ppm (as CH4)
Outlet Port (Swagelok) Without display With display
Electrical Requirements 230V/50Hz
Start Up Time ca. 10 min.
Energy Consumption (W/h) < 30 < 50 < 80 < 100 < 130 < 150
Power Take-Up (at switch-on) 420 W 1600 W
Dimensions (H x W x D) 270 x 340 x 460mm 330 x 460 x 560mm
Shipping Weight (kg) 13 15 19 25 28 32


Options

  • Flowmeter
  • Pressure-gauge
  • Temperature OK/stand by (LED view of catalyst)
  • Potentialfree contacts without hold-function
    Voltage Failure
    Failure Air/ Gas- Supply (1 to 8 bar adjustable)
    Overheating in the Catalytical Chamber
    Exceed of maximum
    Flow Capacity
  • Potentialfree contacts with hold-function
    Example: In case of "Failure Air/Gas-Supply", which means no pressure out of the compressor, immediately an alarm is given via relais. After elimination of the fault the alarm has to be quit manually and the generator starts service again.
  • Reaction to fault detection
    gas delivery cut-off
    automatic switchover to back-up cylinders

Download Specification

同类产品推荐

相关分类导航

产品参数

在线询价 在线询价
当前客户在线交流已关闭
请电话联系他 :