起订量:
罗卓尼克 HC2-S ROTRONIC高精度温湿度传感器
ROTRONIC 瑞士罗卓尼克为您提供全系列的温湿度测量产品:温湿度变送器、记录器、手持表、指示器、探头、传感器和湿度发生器,用于测量和校准相对湿度、温度、露点、水分活度和各种湿度学参数。
ROTRONIC 瑞士罗卓尼克的温湿度产品广泛应用于暖通(HVAC)、智能管理系统(BMS)、生产和过程控制、气象、食品安全和制药等。 ROTRONIC 瑞士罗卓尼克的产品基于*的 HygroClip 数字技术,代表了*的湿度学参数测量技术,以高精度、高稳定性著称于世。
广州微卓测控科技有限公司(Weizhuo measurement and control,Weizhuo M&C Co., LTD)专致于瑞士ROTRONIC罗卓尼克产品的销售和技术服务,我们立足于中国经济较活跃的窗口—广州市,以较新的技术和服务理念面对不对需求的用户,精选Z适合的方案和服务提供给客户比较、参考。
期望我们提供的ROTRONIC罗卓尼克温湿度产品和相应方案、服务能够得到您的认可。
ROTRONIC offers a comprehensive range of humidity instruments: transmitters, data loggers, indicators, probes, sensors and humidity generators for the measurement and calibration of relative humidity, dew point, water activity and other humidity parameters. Problem-free, accurate measurement results from the most stable humidity sensor in the industry combined with our unique HygroClip® digital technology. Our instruments and probes measure both humidity and temperature because temperature is critical to the proper measurement and interpretation of humidity.
The ROTRONIC product range includes humidity temperature transmitters for HVAC, BMS, manufacturing and process control applications, handheld portable humidity temperature indicators, humidity temperature data loggers, humidity temperature generators for the metrology laboratory, meteorological humidity temperature probes as well as water activity indicators for quality control of foods, pharmaceuticals and cosmetics. For special applications, we offer a line of intrinsically safe humidity probes and transmitters. wei-zhuo.com
应用 | 手持表、记录器和变送器,直接或者通过延长线连接。 |
特点 | 湿度工作范围: 0… * rh |
| 温度工作范围: -50… 100 ° C(-50… 212 ° F) |
| 直径: 15mm (0.6 ") |
| 长度: 85mm (3.3 ") |
| 外壳和过滤器:聚碳酸酯,黑色 |
探头类型 | HygroClip® 2 |
湿度传感器 | ROTRONIC Hygromer® IN-1 |
温度传感器 | Pt100, 1 / 3 Class B |
*稳定性 | |
测量范围(可互换探头) | 0… *rh, -50… 100 ° C |
精度——标准探 | ± 0.8%rh / ± 0.1 K(温度23 °C, 湿度10, 35, 80 %rh三点 ) |
精度——高精度探头 | ± 0.5%rh / 0.1 K(温度23 °C,湿度10, 20, 30, 40, 50, 60, 70, 80, 90 % rh九点 ) |
精度——客户定制探头 | ± 0.5% rh /0.1K(在-10至70 ° C范围内 3个可选温度点,20个可选湿度值); |
Airchip再现性 | < 0.02 %rh / 0.01 K |
响应时间t63 | < 15秒 |
初始化时间 | < 2秒 |
测量间隔 | 通常1秒(计算功能未启用) |
工作范围 | -50…100 °C;0…100 %rh |
允许风速 | 20 m/s |
报警 | 测量值报警,传感器故障和短路报警 |
数据存储 | 2000个记录(%rh/°C,日期/时间) |
软件 | ROTRONIC HW4 |
统计功能 | 统计功能 |
探头调节(通过软件) | 1点或多点温湿度 |
湿度学参数计算 | 露点/霜点 |
事件日志 | 系统相关事件(FDA, GAMP) |
用户定义模拟量输出量程 | 可以 |
用户信息 | 由HW4进行管理 |
软件数据处理 | 通过接口电缆 |
设备密码保护功能 | 有 |
传感器诊断(漂移,状态) | 可设定;出厂缺省设置-关 |
溯源/电子记录 | 溯源/电子记录 |
数据存储 | 2000组数据存储 |
供电/功耗 | 3.2…5 VDC ±0 % / < 4.5 mA |
信号输出类型 | 2 x 0…1 VDC |
模拟信号输出(标准) | 0…1 V = 0...100 %rh0…1 V = -50...60 °C |
数字信号输出(标准) | UART = Universal AsynchronousReceiverTransmitter (ASCII) |
接口标准 | UART |
电压反极性保护 | 接头机械性保护 |
温湿度传感器支架 | 有 |
延长电缆zui大长度 | 5 m |
探头材质 | 聚碳酸酯 |
过滤器 | 聚乙烯过滤器 |
外壳材质 | 聚碳酸酯 |
尺寸 | 15 x 82 mm |
重量 | 约 9 g |
FDA/GAMP | FDA CFR21 part 11 & GAMP |
订货号 | HC2-S |