FLOWLINE LU80 / LU81 / LU83 /LU84液位计

首页>仪表大类>液位仪表>液位计

FLOWLINE LU80 / LU81 / LU83 /LU84液位计

型号
深圳市德隆泰科技有限公司

免费会员 

经销商

该企业相似产品

HACH水质仪表,GF水质仪表流量仪表,TYCO KEYSTONE阀门

 


公司主营国外的各类阀门,执行器,流量计,料液位仪表,压力仪表及电力智能仪表等产品。随着公司销售业绩的不断提升,已成为美国TYCO,美国+GF+SIGHET,德国KROHNE,美国HACH,美国FLOWLINE,法国SOCOMEC,瑞士HUBA等公司的*销售商。

 在的自动化控制方面,已成为国内*的补充力量。特别是和+GF+SIGHET的合作,更景上云天;公司*大量现货供应,价格合理。同时和德国KROHNE经过几年的合作,已成为其主要的业务代理机构。美国哈希HACH的产品也进步中,从原来部分产品现货到现在所有产品现货供应,价格优势也更明显。

详细信息

FLOWLINE LU80 / LU81 / LU83 /LU84液位计
说明
LU80 / LU81 / LU83 /LU84是一种通用型两线制超声波液位变送器,它提供了无触点的液位测量,测量上限为10m.它非常适合高要求的超纯液体、腐蚀性和废液液位的测量。 变送器可以用按键调校。在大型常压储存器、常用储存罐和废液池测量中,它被广泛选用。例如被测介质还包括废水和氢氧化钠等。

性能
1.采用调校按键和LCD液晶显示,使设置快速而简单。
2.提供3个测量范围,*大测量距离是10m,带2″的探头。
3. 6位数字LCD显示,用英寸或cm显示液位。
4.*小的射束直径(7.6cm),可在有限的空间内应用
5.可选择显示液面距离和液体高度。 ? PC/ABS材料密封,等级为NEMA 4X,带坚固的PVDF探头。
6.智能化的故障保护,带诊断返回,方便故障查找。

选型
LU80-5101 /LU80-5161: 3米 NPT/公制接口
LU81-5101 /LU81-5161: 5米 NPT/公制接口
LU83-5101 /LU83-5161: 8米 NPT/公制接口
LU84-5101 /LU84-5161: 10米 NPT/公制接口
 
 
测量范围
LU80: (10cm- 3m)
LU81: (20cm- 5m)
LU83:(30cm- 8m)
LU84:(30cm-10m)
测量精度
± 0.2% ,全量程,在空气中
分辨率
LU81/83: 0.039" (1 mm)
LU84:?? ?0.078" (2 mm)
射束宽度
3" (7.6 cm) 直径
盲区
LU81: 4" (10 cm)
LU83: 8" (20 cm)
LU84: 12" (30 cm)
显示类型
LCD, 6位数字
显示单位
英寸, cm ,百分数
显示内容
液面距离或液位高度
供电电源
12-28VDC
回路阻抗
500Ω @ 24 VDC
输出信号
4-20 mA 或 20-4 mA
调校
按键
过程温度
C: -20°-60°
温度补偿
自动
电气温度
C: -40°-71°
压力
2 bar@ 25°C;高于25°C每°C降低(0.113 bar)
密封等级
NEMA 4X (IP65)
密封材料
PC/ABS FR
变送器材料
PVDF
过程安装
2" NPT (2" G)
安装垫圈
Viton
进线口
两路, 1/2" NPT
类型
通用型
CE论证
EN 61326 EMC
 


详细英文介绍


Browse the Products
EchoSpan™ GP Ultrasonic Transmitter, Non-contact Measurement with Display
 
Application
The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8' or 10m, and is ideally suited for challenging ultrapure, corrosive or waste liquids. Push button calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include wastewater and sodium hydroxide.
Features
Setup is fast and simple with push button calibration and LCD display
Offered in three measurement ranges up to 10m with 2" transducer
6-segment LCD display indicates level in inch or centimeter values
Narrow 3" minimum beam width for applications with restricted space
PC/ABS enclosure rated NEMA 4X with rugged PVDF transducer
Fail-safe intelligence with diagnostic feedback for easy troubleshooting
Configuration
Calibration is fast and simple with our scrolling single layer menu, three button interface and 6-segment LCD display. Troubleshooting is easy with our unique Setup and Diagnostic feedback modes. Setup displays the transmitter's calibration set points. Diagnostics provides users with a snapshot of sensor performance and application variables. Its full feature level made simple.

      
Specifications
Range:
LU81: 8" to 16.4' (20cm to 5m)
LU83: 8" to 26.2' (20cm to 8m)
LU84: 12" to 32.8' (30cm to 10m)
Accuracy:
± 0.2% of span in air
Resolution:
LU81/83: 0.039" (1 mm)
LU84: 0.078" (2 mm)
Beam width:
3" (7.6 cm) dia.
Dead band:
LU81/83: 8" (20 cm)
LU84: 12" (30 cm)
Display type:
LCD, 6-digit
Display units:
Inch, cm and percent
Memory:
Non-volatile
Supply voltage:
12-28 VDC
Loop resist.:
500 Ohms @ 24 VDC
Signal output:
4-20 mA, two-wire
Signal invert:
4-20 mA, 20-4 mA
Calibration:
Push button
Fail-safety:
Selectable 4mA, 20mA
21mA, 22mA or hold
Process temp:
F: -4° to 140°
C: -20° to 60°
Temp. comp.:
Automatic
Ambient temp:
F: -40° to 160°
C: -40° to 71°
Pressure:
30 psi (2 bar) @ 25°C., derated @ 1.667
psi (.113 bar) per °C.
above 25°C.
Enclosure rating:
NEMA 4X (IP65)
Enclosure vent:
Water tight membrane
Encl. material:
PC/ABS FR
Trans. material:
PVDF
Process mount:
2" NPT (2" G)
Mount gasket:
Viton®
Conduit entrance:
Dual, 1/2" NPT
Classification:
General purpose
Compliance:
CE: EN61326, EMC
Order
Compatible Products
 
DataView™ II LI55 Advanced Meter and Controller
The general purpose meter displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater.
Commander™ LI90, Advanced Micro PLC Controller
As a compact, powerful controller - the Commander series can be used in literally thousands of applications. From OEM machine control to machine monitoring in a plant environment, the Commander series can be instrumental in keeping you or your customer's automation activities running smoothly.


同类产品推荐

相关分类导航

产品参数

在线询价 在线询价
您的留言已提交成功~

采购或询价产品,请直接拨打电话联系

联系人:邹佳群

联系方式:
温馨提示

该企业已关闭在线交流功能