Chamber Structure

The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic（linpin）.
A large observation window is set on the chamber door.
A test hole with 25mm, or 50mm or 100mm diameter is set on the left of the chamber body.
A fixable PU moving wheel is adopted on the bottom of the test chamber（linpin）.

Controller

The temperature controller adopts fully imported （Japanese PKC） meter with touch keys.
P.I.D automation calculation function is available.

Cooling and Air Path Circulation System

The cooler adopts original French Tecumseh fully-closed compressor（linpin）.
The cooling system adopts single or dual low-temperature loop system design.

Standards Applied

GB/T2423.1-2001 and GB/T2423.2-2001

Specs and Technical Parameters