HMI人机显示面板

HMI人机显示面板

参考价: 面议

具体成交价以合同协议为准
2017-10-15 01:26:24
476
产品属性
关闭
北京松信宏泽科技有限公司

北京松信宏泽科技有限公司

延保会员
收藏

组合推荐相似产品

产品简介

产品简介:
Detcon SmartWireless™ gas detection systems include 16 or 32 channel HMI modules that provide operator interface to the network and real time status display of all network devices. Operator inte

详细介绍

北京松信宏泽科技有限公司

:潘女士

HMI人机显示面板

产品简介:
Detcon SmartWireless™ gas detection systems include 16 or 32 channel HMI modules that provide operator interface to the network and real time status display of all network devices. Operator interface is through the HMI panel via a small programming magnet. Command functions include alarm reset, alarm acknowledge, alarm test and radio silence. In normal operation the HMI panel provides real time display of gas concentrations or the status of other field devices; Smart Battery charge levels, network RF signal quality and any number of fault diagnostic conditions effecting either an individual field device or the network in general.  hese fault conditions are displayed on the HMI screen. Another useful feature is field device tags.

The wireless HMI panel is available in two packages; one rated for Class 1; Division 1, Group C, D hazardous areas and the other rated for Class 1, Division 2; Group A, B, C, D areas. Operator interface is non-intrusive via magnetic contact switches located behind the glass lens cover. his advanced design takes advantage of a low power LCD with back light and ultra low power components that extend operating time for 2-3 months before recharge is required. Like all other Detcon Smart Wireless™ system components, power is provided by Detcon’s Smart Battery Pack. An optional solar charging panel can be used to extend operating 
time for virtually any application.

HMI人机显示面板

产品特点:
• 16 and 32 channel capacity panels
• Real time 4 line 40 character LCD
• Field device status and location tag
• Alarm condition LEDs
• Non-intrusive operator interface

产品规格:
     2 options
     Class I; Division 1; Groups C, D
     Class I; Division 2; Groups A, B, C, D
     16”W x 13”H x 10”D
     20 lbs
     1 Year

产品简介:      
    Model RXT-300系列的智能无线收发器可理想地使用于信号数据传输,广泛地应用于工业检测和报警系统。数据信号可以是4-20mA的模拟量或总线制MODBUS。收发器工作在2.4Hz,通用的无需许可证申请的频段。无线网络的完整性和安全性由直序扩频无线网络技术来保证。无线网络的应用可以简单至一台现场设备与主控制器的通讯,或者是多台现场设备组成一个用户网络。与传统的网状网络不同,处理能力是在所有的设备中分享的,因此也不会存在单一设备独立的情况。在网络中的每个设备都可以为其他设备充当路由器或者中继器。这就意味着用户可以跳过毗邻的设备,和其他设备相互通讯。这项*的创新技术可以构成一个能自动绕多堵塞和可视障碍的强大网络,增大了吞吐量以适应用户设备密度的增加。

北京松信宏泽科技有限公司

:潘女士

上一篇:二氧化氯报警器的使用方法是什么 下一篇:乙酸气体报警器如何联动排风和切断设备呢
热线电话 在线询价
提示

请选择您要拨打的电话:

温馨提示

该企业已关闭在线交流功能