M90 CO2 分析仪

M90 CO2 分析仪

参考价: 面议

具体成交价以合同协议为准
2017-09-23 00:11:00
440
产品属性
关闭
北京松信宏泽科技有限公司

北京松信宏泽科技有限公司

延保会员
收藏

组合推荐相似产品

产品简介

产品简介:
This uniquely rugged and simple design by Envent Engineering utilizes dual-beam technology for accuracy and stability.

应用:
CO2 is measured routinely in natural gas for product quality and proce

详细介绍

北京松信宏泽科技有限公司

:潘女士

M90 CO2 分析仪

产品简介:
This uniquely rugged and simple design by Envent Engineering utilizes dual-beam technology for accuracy and stability.

应用:
CO2 is measured routinely in natural gas for product quality and process control purposes. Common ranges are from 0–5% for sales gas and up to 0–30% for inlet CO2 concentration. Some H2S removal chemical processes can be fine-tuned by slip stream as much CO2 as possible to gain volume but not so much as to exceed pipeline tariff limits of typically 2–4%. CO2 is also a combustion byproduct and needs to be quantified.
M90 CO2 分析仪

产品特点:
True Dual-Beam Technology 
Long-term stability 
Low power consumption 
Alarms 
Backlit, 16-character, 2-line Display 
4–20 mA output 

Value
The M90 dual-beam IR CO2-detection system continuously measures and corrects for the short and long-term changes that caused measurement errors in first-generation, single-beam CO2 sensors. The M90 is a compact CO2 sensor which uses less than 2 watts of operating power, provides linearized analog or digital measurement outputs. Options include adjustable set point control relays.

The M90 offers industry-leading value in price for Class 1, Division 1 Groups C & D hazardous locations. Standard range is 0–20 % CO2 but other ranges available upon request.

技术参数:

 

EnclosureClass 1, Div1 Grps C & D
Operating PrincipleDual-beam, non-dispersive infrared (NDIR)
DetectorSapphire window with glass frit seal
Sensing Cell Proof Pressure (sample cell only)2 PSI (13.8 KPa) gauge pressure
Measurement Range0–20% CO2 (other ranges available upon request)
Repeatability± 0.1 % CO2
Lower Detectable Limit0.1 % CO2
DriftLess than 2.5% of reading/year
Accuracy± 3% of reading or 0.1% CO2 at cal temperature ± 5% of reading or 0.1% CO2 over full operating temperature range
Warmup timeLess than 5 minutes
Operating Temperature10 - 50˚C
Operating HumiditySensing Cell: 0–100% RH (non condensing)
Electronics: 0–90% RH (non condensing)
Storage Temperature-20–60˚C.
Storage Humidity0–90% RH (non condensing)
Analog OutputIsolated 4–20 mA
Digital InterfaceRS-485 & RS-232
Operating Power24 VDC at 5 Watts standard, 12 VDC optional
Source Life10 years minimum
Alarm Outputs2 solid state drivers 2 Amp, 30 VDC maximum
Standard Sample SystemInlet filter (1,500 psig max) and SS single stage regulator (3,000 psig max), flow meter (100 psig max) mounted

北京松信宏泽科技有限公司

:潘女士

上一篇:二氧化氯报警器的使用方法是什么 下一篇:乙酸气体报警器如何联动排风和切断设备呢
热线电话 在线询价
提示

请选择您要拨打的电话:

温馨提示

该企业已关闭在线交流功能