截止阀国家标准
时间：2012-10-22 阅读：3557
| 标准编号 | 标准中文名称 | 标准英文名称 |
| DL/T531-1994（2005复审） | 电站高温高压截止阀、闸阀技术条件 |
|
| GB/T11689-1989 | 船用法兰铸钢截止阀（四进位） | Marine cast steel flanged stop valves |
| GB/T12235-1989 | 通用阀门法兰连接钢制截止阀和升降式止回阀 | General purpose industrial valves—Flanged steel globe valves and lift check valves |
| GB/T12233-1989 | 通用阀门铁制截止阀与升降式止回阀 | General purpose industrial valves—Casting iron globe valves and lift check valves |
| GB/T1951-1984 | 船用低压外螺纹青铜截止阀 | Marine low pressure bronze male threaded stop valves |
| GB/T2499-1993 | 船用法兰铸铁双排截止阀箱 | Marine cast iron flange dual-row stop valves-case |
| GB/T590-1993 | 船用法兰铸铁截止阀 | Marine cast iron flanged stop valves |
| GB/T594-1983 | 船用外螺纹锻钢截止阀 | Marine forged steel male thread stop valves |
| GB/T584-1999 | 船用法兰铸钢截止阀 | Marine cast steel flanged stop valves |
| GB/T595-1983 | 船用外螺纹青铜截止阀 | Marine bronze male thread stop valves |
| GB/T587-1993 | 船用法兰青铜截止阀 | Marine bronze flanged stop valves |
| JB/T7245-1994 | 制冷装置用截止阀 |
|
| JB/T7747-1995 | 针形截止阀 |
|
| JB/T9081-1999 | 空气分离设备用低温截止阀和节流阀技术条件 |
|
| JB/T53165-1999 | 高压平衡截止阀 产品质量分等 |
|
| JB/T53174-1999 | 截止阀 产品质量分等 |
|
| JB/T53155-1999 | 空气分离设备用低温截止阀和节流阀 产品质量分等 |
|
| JB/T8859-2004 | 截止阀 静压寿命试验规程 |
|
| HG/T3215-1986 | 聚三氟氯乙烯塑料衬里截止阀 |
|
| NF E29-350-2003 | 工业用阀.钢制球阀、球状截止阀和止回阀 | （Industrial valves - Steel globe and globe stop and check valves.） |
| NF P43-001-2000 | 建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求 | （Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.） |
| NF D36-380-2001 | 燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 | （Valve proving systems for automatic shut-off valves for gas burners and gas appliances.） |
| NF A84-621-2002 | 气焊设备.焊接、切割和相关工艺用带截止阀的速动连接 | （Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.） |
| NF M88-771-1975 | 液化烃容器装置.手动截止阀.制造.功能.试验 | （LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.） |
| NF P43-002-1981 | 建筑物水管阀门.水表截止阀.一般技术规范 | （VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.） |
| BS EN 13709-2003 | 工业用阀.钢制球阀、球状截止阀和止回阀 | （Industrial valves - Steel globe and globe stop and check valves） |
| BS 1552-1995 | 一类、二类和三类燃气用手动截止阀规范 | （Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar） |
| BS 7461-1991 | 带有流量调节器、闭路开关指示、闭合位置指示器开关或气流量控制的电动自动气体截止阀规范 | （Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control） |
| BS 1010-2-1973 | 给排水设施用排放旋塞和截止（旋压式）阀规范.第2部分:排放旋塞和地面上用截止阀 | （Specification for draw-off taps and stopvalves for water services （screw-down pattern） - Draw-off taps and above-ground stopvalves） |
| BS 1873-1975 | 石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀（有法兰及对接焊端）规范 | （Specification for steel globe and globe stop and check valves （flanged and butt-welding ends） for the petroleum, petrochemical and allied industries） |
| BS 3457-1973 | 水与截止阀座垫圈材料规范 | （Specification for materials for water tap and stopvalve seat washers） |
| DIN 4817-1-1981 | 液态气的截止阀.概念.安全技术要求.检验.标志 | （Shut off valves for liquefied gases; definitions, requirement, testing, marking） |
| DIN 86251-1998 | 造船用铸铁制带法兰的DN15至500的截止阀 | （Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500） |
| DIN 86260-1998 | 造船用炮铜制带法兰DN15至500的截止阀 | （Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500） |
| DIN 85003-4-1997 | 造船用管件的交货技术条件.第4部分:截止阀 | （Technical specifications for valves for shipboard use - Part 4: Stop valves） |
| DIN 85003-6-1997 | 造船用管件的交货技术条件.第6部分:手动截止阀 | （Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves） |
| DIN 3399-1986 | 低压截止阀.安全技术要求和检验 | （Gas low-pressure cut-off valves; safety requirements, testing） |
| DIN 3160-1974 | 公称压力25的冷却剂循环直通截止阀 | （Through-valves for refrigerant circuits, nominal pressure 25 bar） |
| DIN 3161-1974 | 公称压力25的冷却剂循环角形截止阀 | （Elbow valves for refrigerant circuits; nominal pressure 25 bar） |
| DIN 4056-1992 | 水管.街道地下截止阀门的路盖.DVGW技术规范 | （Water pipelines; valve boxes for stop valves; DVGW code of practice） |
| DIN EN 1643-2001 | 燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 | （Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000） |
| DIN 86500-1968 | 船用螺纹连接的截止阀和闸阀等概述 | （Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding） |
| DIN 86254-2000 | 船只及造船技术.超轻型截止阀DN32-DN125（PN10） | （Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10） |
| DIN EN 13709-2003 | 工业用阀.钢制球阀、球状截止阀和止回阀 | （Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002） |
| DIN EN 1213-1999 | 建筑阀门.建筑物中饮用水供应用铜合金截止阀.试验和要求 | （Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999） |
| DIN 86266-2002 | 船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀 | （Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10） |
| GB/T1856-1993 | 船用法兰铸铁单排排出截止阀箱 | Marine flanged cast iron single arrangement exhaust stop box valve |
| GB/T1854-1993 | 船用法兰铸铁单排吸入截止阀箱 | Marine flanged cast iron single arrangement suction stop box valve |
| JIS B8605-2002 | 致冷装置的截止阀 | （Stop valves for refrigerants） |
| JIS F7379-1996 | 造船.卡套式30K黄铜截止阀 | （Shipbuilding -- Brass 30K stop valves with bite joint（s）） |
| JIS E4103-1988 | 铁路车辆用截止阀 | （Cut-out cocks for railway rolling stock） |
| JIS E4114-1989 | 铁路车辆用青铜截止阀 | （Bronze stop valves for railway rolling stock） |
| QB/T3880-1999 | 卫生洁具、暖气直角式截止阀技术条件 | Technical requirements for sanitariness ware and heating angle valve |
| QB/T3881-1999 | 卫生洁具、暖气直角式截止阀型式和尺寸 | Shapes and dimensions of sanitariness ware and heating angle valve |
| JB/T10530-2005 | 氧气用截止阀 |
|