日本SMC电磁阀接线图

容易地添加或减少
阀站的数量。
方便阀门维护
可安装带
一个螺丝。

使用卡带式的阀门和歧管，使
很容易地增加或减少站的数量
在DIN导轨上。该插件类型包括两个额外
阀站连接器。这种设计使得重装
歧管扩张过程中不必要的。

日本SMC电磁阀接线图

Easy to add or decrease
the number of valve stations.
Easy valve maintenance
Mountable with
one screw.
The use of cassette style valves and manifolds makes
it easy to increase or decrease the number of stations
on a DIN rail. The plug-in type includes two extra
valve station connectors. This design makes rewiring
unnecessary during manifold expansion.

注1）使用干燥的空气，以防止冷凝在低温条件下工作。
注2）耐振动：不发生故障，在45和2000赫兹之间有一个扫描测试。测试
在两个激励和去激励状态在轴向方向上执行
和在垂直于主阀和电枢。 （值在初始
期）
耐冲击性：当它与在轴向一个下跌试验机测试未发生故障
方向，并在合适的角度，以在这两个主阀和电枢
通电和断电状态每一次为每个条件。
注意仅3）金属密封型。
注4）快速响应，高压型的

Note 1) Use dry air to prevent condensation when operating at low temperatures.
Note 2) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000 Hz. Test
was performed at both energized and de-energized states in the axial direction
and at the right angles to the main valve and armature. (Values at the initial
period)
Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial
direction and at the right angles to the main valve and armature in both
energized and deenergized states every once for each condition.
Note 3) Metal seal type only.
Note 4) Value for quick response, high pressure type

接线图