NUMATICS电磁阀线圈结构,P01515EM4000040

NN系列型材气缸
安装尺寸符合VDMA24562及ISO6431标准气缸从32mm到100mm
单、双作用及单，双活塞杆
活塞杆：高强度钢、铬表面涂铬，抛光
铝合金缸筒，放磨损涂层
磁环及感应开关选项 标准带可调缓冲
温度范围：-10摄氏度~+60摄氏度
工作压力：1到10bar
丁晴橡胶（NBR）及力胶（PU）密封
已过滤洁净压缩空气，润滑或不润滑 镀锌螺母

NUMATICS电磁阀线圈结构,P01515EM4000040

These solenoid valves are intended for use on clean
dry air or inert gas, filtered to 40 micrometres or better.
The dew point of the media should be at least 10°C
(18° F) below the minimum temperature to which any
portion of the clean air/inert gas system could be
exposed to prevent freezing. If lubricated air is used,
the lubricants must be compatible with Nitrile elastomers.
Diester oils may cause operational problems.
Instrument air in compliance with ANSI/ISA Standard
7.0.01-1996 exceeds the above requirements and is,
therefore, an acceptable media for these valves.

JPIS8551B306
JPIS8551B318
JPIS8551B367
JPIS8551B368
JPIS8551B308
JPIS8551B320
JPIS8551B314
JPIS8551B322
JPIS8553B306
JPIS8553B318
JPIS8553B314
JPIS8553B322
JPIS8551B305
JPIS8551B317
JPIS8551B307
JPIS8551B319
JPIS8551B313
JPIS8551B321
JPIS8553B305
JPIS8553B317
JPIS8553B313
JPIS8553B321