：   53343323  

TOC总有机碳试验仪用于测试纯水、制药工业去离子水和注射用水的有机碳含量制药和生物化学清洗验证：在制药和生物化学制药业处理过程中，监测在循环清洗。半导体中监测纯化水中toc的含量。

一、工作原理

本仪器采用紫外氧化的原理，将样品中的有机物氧化为二氧化碳，二氧化碳的测试采用的是直接电导率法，通过测试经过氧化反应的样品的总碳含量和未经过氧化反应的样品总无机碳的含量差值来测定总有机碳含量，即：总有机碳（TOC）=总碳（TC）-总无机碳（TIC）。

二.产品特点

1.仪器采用便携设计，使用轻便，方便移动至取样点。

2.采用嵌入式系统，触摸屏设计，纯中文操作方便简易。

3.针对制药用水（TOC含量在1000ppb以下）总有机碳含量的检测设计，进行检测。

4.配备大量的储存空间，能够存储大量的测试数据。

5.中文打印，输出测试参数、测试结果。

6.在使用、贮存和更换过程中不需要气体或试剂，无移动部件，减少维修和维护成本。

7.当测试样品浓度超过规定限度，仪器能够自动报警，并输出控制信号。

8.符合国家2010版《中国药典》规定的测试方案，可以提供 IQ/OQ/PQ 服务。

三、性能规格:

测量范围：0.001mg/L～1.000 mg/L

精 度：±4% 测试范围

分 辨 率：0.001mg /L

分析时间：连续分析

响应时间：6分钟之内

检测极限：0.001mg /L

样品温度：1- 90℃

重复性误差：≤ 3%

电源要求/功能：220V

显 示 屏：彩色触摸屏

四、应用范围
1. 该仪器可用于检测制药工业中纯化水、注射用水和去离子水中有机碳的浓

 度；也可用于半导体行业中超纯水TOC的检测。
2. 在制药领域和生物化学领域清洁验证过程中，可用于验证清洁效果。
3. 该仪器具有在线检测功能，可以在线监测制药工业的制水系统、半导体工业

  的超纯水制备系统和晶片工艺过程、电厂去离子水制备过程等。

五、技术参数：

TOC tester used for testing the water, pharmaceutical industry, the organic carbon content of deionized water and water for injection of pharmaceutical and biological chemical cleaning validation: in the pharmaceutical and biological chemical industry in the process, monitoring the cleaning cycles. The content of toc monitoring in the semiconductor purified water.

A, work principle

The instrument adopts the principle of ultraviolet oxidation, organic matter in the sample of the oxidation of carbon dioxide, carbon dioxide test USES a direct conductivity method, pass the test after the sample of the oxidation reaction of total carbon content and without the sample of the peroxidation of total inorganic carbon content difference to determination of total organic carbon content, i.e., the total organic carbon (TOC) = total carbon (TC) - total inorganic carbon (TIC).

2. Product features

1. The instrument USES a portable design, the use of lightweight, convenient to move to sampling points.

2. Adopt the embedded system, touch screen design, pure Chinese simple easy to operate.

3. In view of the pharmaceutical water (TOC content under 1000 PPB) total organic carbon content detection is designed, tested.

4. Equipped with a lot of storage space, can save a lot of testing data.

5. Chinese print output test parameters, test results.

6. In the process of use, storage and replace don't need gas or reagent, no moving parts, less maintenance and maintenance costs.

7. When the test sample concentrations in excess of the prescribed limit, the instrument can automatically alarm, and output control signals.

8. In conformity with the 2010 edition of "Chinese pharmacopoeia" provisions of the state of the testing solution, can provide the IQ/OQ/PQ service.

Three, performance specifications:

Measuring range: 0.001 mg/L ~ 1.000 mg/L

Pure c: plus or minus 4% test range

Resolution: 0.001 mg/L

Analysis time: continuous analysis

Response time: 6 minutes

Detection limit: 0.001 mg/L

The sample temperature: 1-90 ℃

Repeatability error: 3% or less

Power requirements/function: 220 v

Show panel: color touch screen

Four, scope of application

1. The instrument can be used to detect the pharmaceutical industry in the purified water, water for injection and organic carbon concentration in deionized water

Degree; Can also be used in the detection of ultrapure water TOC in the semiconductor industry.

2. In the field of pharmaceutical and biological chemistry cleaning validation process, can be used to verify the cleaning effect.

3. The instrument has the function of on-line detection, can online monitoring system of pharmaceutical industry water system, the semiconductor industry

The preparation of the system and wafer process, the preparation process of deionized water of power plants.

售后服务：

1、设备保修两年，终身服务，两年内非人为损坏的零部件免费更换，保修期内接到用户邀请后， zui迟响应时间为2小时内，在与用户确认故障后，我公司会在48小时内派工程师到达现场进行免费服务，尽快查清故障所在位置和故障原因，并向用户及时报告故障的原因和排除办法 。

2、保修期内人为损坏的零部件按采购（加工）价格收费更换。

3、保修期外继续为用户提供优质技术服务，在接到用户维修邀请后3天内派工程师到达用户现场进行维修。并享有优惠购买零配件的待遇。

4、传感器过载及整机电路超压损坏不在保修范围内。