| 
MVC-1000A1/MVC-1000D1显微硬度计造型新颖、美观、而且它具有良好的可靠性，可操作性和直观性。内置硬度计算器，可通过输入压痕对角线长度，直接在LCD屏幕上显示硬度值。 该机采用高倍率光学测量系统，目镜鼓轮一次读数。可测定钢、有色金属、IC薄片、薄塑料、金属薄片、涂层、表面覆层、层压金属、热处理碳化层和淬火硬化层的深度与硬度梯度。 The MVC-1000A1 type counts to show the degree of hardness accounts the shape novel and beautiful,ａnd it have the good and dependable,maneuverability with keep the view.the inside places the degree of hardness calculator,can pass the importation press the diagonal line length,direct the manifestation degree of hardness is worth in LCD holding the act. That machine adopts the high magnification optics the diagraph the system,the eyes drum round is a to read the number.Can measurese the steel,have the color metals,the thin slice of IC,thin plastics,metals thin slice and draw the layer,surface layer,layer press the metals,heat handles the carbonization layer hardens the depth of the layer with the fire of and degree of hardness steps degree. | 技术规格 | Main technical parameters | | 显微硬度标尺: | Vickers scales: | | HV0.01,HV0.025,HV0.05,HV0.1,HV0.3,HV0.5,HV1 | HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5, HV1 | | 显示:保持时间（秒），硬度值 | Display: dwell time(s),Hardness | | 试验力(gf):10，25，50，100，200，300，500，1000 | Test force(gf):10，25，50，100，200，300，500，1000 | | 加载控制:自动（加载/保持/卸载） | Load control:automatic(loading/dwell/unload) | | 试验力保持时间(s):5～60 | Total test force dwell time(S):5~60 | | 试验力选择:外置式选力旋钮，试验力自动显示在LCD屏上 | Test force selection:External force election knob | | | the test showed strength in LCD screen | | 物镜:10×，40× | Objective magnification:10×，40× | | 目镜放大倍数:10× | Eyepiece magnification:10× | | 总放大倍数(μm):100×（观察）, 400×（测量） | Total magnification:100×（Observation）, 400×（measurement） | | 测量范围(μm):200 | Measuring range(μm):200 | | 分辨率(μm):0.25 | Resolution(μm):0.25 | | 测量范围:(5-3000)HV | Measuring range:(5-3000)HV | | XY试台 尺寸(mm):100×100 | XY stage Dimensions(mm):100×100 | | 行程范围(mm):25×25 | Travel range(mm):25×25 | | 最小读数(mm):0.01 | Minimum reading: 0.01 | | 试件高度(mm):85（2.55") | Max height of speciments(mm)：85（2.55") | | 试件宽度(mm):120(3.35")(从压头中心线至机壁距离） | Distance from indeneter's center to outerwall(mm)：120 | | 输出:内置式微打(选配)、RS232串行接口 | Output:built-in printer(Select Configure),RS232 serial | | 电源电压:AC220V/50HZ | Power supply:AC220V/50HZ | | 外形尺寸(mm):490×310×515 | Dimensions(mm):490×310×515 | | 重量(kg):35 | Weight(kg):35 | |
