SJ-001防静电地板蜡产品说明书
时间：2013-05-08 阅读：834
SJ-001防静电地板蜡
【产品说明】
采用*导电聚合物技术，提供持久的静电耗散功能，可有效消除静电积聚，释放表面静电，减少静电放电引起的功能失效、报废及尘埃积聚，保持洁净、亮丽的外观效果。
【性能指标】
表面电阻：105-108欧姆 体积电阻:105-108欧姆
静电衰减：＜0.3秒 起电电压：＜70伏
静电衰减：＜0.3秒 起电电压：＜70伏
固体含量：20±0.5% PH值：8.0-9.0
【适用标准】
适用于有静电控制要求的微电子、电信、电子控制、医疗等地面的防静电处理。
符合国家标准及行业标准 SJ/T11159-1998、GB/T14437-97、IEC61340-5-1、SJ/T10694-1996。
【使用方法】
1、 用强力起蜡水将地板上旧蜡层*除掉。洗净地板，清除杂物，污渍，并让其*干燥。
2、 以打蜡工具倒退式均匀布蜡，涂蜡后等干燥30-60分钟。
3、 如有必要，待*层蜡*干透后，再布第二或第三层蜡。
【注意事项】
1、 操作温度：地坪表面温度大于10℃。
2、 在通风良好的环境下使用，严禁冰冻，不要稀释本品。勿将用剩的蜡倒回原容器。
3、 0℃以上保存，密封避免儿童接触。若不慎入眼内立即用清水冲洗，如有不适，请就医。
4、 一切不当使用，生产商拒绝索偿责任。
【产品成分】丙烯酸聚合物，聚乙烯，碳酸四氧锌，水等。
【保质期】避免阳光直射，放于阴凉干燥处，密封保存2年。
【制造日期批号】标示于桶底。
【包装规格】1加仑=3.785L；4加仑/箱；5加仑/桶； 150KG/桶；
Anti-static floor wax
【Product Description】
Use of advanced conductive polymertechnology to providelastingand efficientelectrostaticdissipationfunction, which can effectively eliminatetheaccumulation of static electricity, the release of thesurfacestatictoreduceelectrostatic dischargecaused byfailure, scrap anddustaccumulation, maintaining clean, bright appearance.
【Performance】
【Performance】
Surface resistance : 105-108-ohm Volume resistivity : 105-108-ohm
Static decay: <0.3 seconds Electrification voltage: 70 V
Solid content: 20 ± 0.5% PH value :8.0-9.0
【Applicable Standards】
Static decay: <0.3 seconds Electrification voltage: 70 V
Solid content: 20 ± 0.5% PH value :8.0-9.0
【Applicable Standards】
Applies to static control requirements of microelectronics, ecommunications, electronic control, medical and other ground anti-static treatment.
Meet national standards and industry standards SJ/T11159-1998, GB/T14437-97, IEC61340-5-1, SJ/T10694-1996.
【Use 】
1, strong wax from the water on the floor of the old wax layer compley removed. Wash floors, remove debris, dirt, and let it dry compley.
Meet national standards and industry standards SJ/T11159-1998, GB/T14437-97, IEC61340-5-1, SJ/T10694-1996.
【Use 】
1, strong wax from the water on the floor of the old wax layer compley removed. Wash floors, remove debris, dirt, and let it dry compley.
2, waxing tool back style uniform cloth, wax, wax and other dry 30-60 minutes.
3, if necessary, until the first layer of wax is compley dry, re-cloth the second or third layer of wax.
【Note】
3, if necessary, until the first layer of wax is compley dry, re-cloth the second or third layer of wax.
【Note】
1, operating temperature: the floor surface temperature is greater than 10 ℃.
2, In well-ventilated environment, is strictly prohibited frozen, do not dilute this product. Do not use the leftover wax down back to the original container.
3, 0 ° C or more and save, sealing to avoid the reach of children. If you accidentally into eyes, immediay rinse with water, if not, call a physician.
4, improper use, the manufacturer refused to claim responsibility.
【Product composition】
2, In well-ventilated environment, is strictly prohibited frozen, do not dilute this product. Do not use the leftover wax down back to the original container.
3, 0 ° C or more and save, sealing to avoid the reach of children. If you accidentally into eyes, immediay rinse with water, if not, call a physician.
4, improper use, the manufacturer refused to claim responsibility.
【Product composition】
Acrylic polymers, polyethylene,fouroxygenzinccarbonate, water, etc..
【Shelf life】Avoid direct sunlight, put in a cooldry place, sealed and storedfor2 years.
【Manufacturing date and batch number】Marked on the barrel end.
【Package】1 gallon = 3.785L; 4 gallons / box; 5 gallons / barrel; 150KG / barrel;
【Shelf life】Avoid direct sunlight, put in a cooldry place, sealed and storedfor2 years.
【Manufacturing date and batch number】Marked on the barrel end.
【Package】1 gallon = 3.785L; 4 gallons / box; 5 gallons / barrel; 150KG / barrel;