美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪可由直接拉脱的方法量度混凝土、沥青、磁砖、混凝土收复或其他表面物料的粘力或拉力。

The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. By pulling a 25mm steel disk attached to the material under the unit can,

1. Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
2. Determine the bond strength of a repair or overlay material after it is applied to the substrate
3. Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface

The James Bond Tester™ MK III  has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.

Purchasing Notes
 

• Each System comes with 10, 50mm 2 inch, ASTM Standard 1583 - 04  stainless steel disks
• Customers who purchase this may also need the T-M-170 Moisture Master or T-HT-1000 Humitest for substrate moisture testing

Features and Benefits

·         Accurate bond strength of repair mortars, epoxy resins, laminates, overlays, and other coatings.

·         Calibrated gauge with maximum load indicator and mechanical damping.

·         Ball Joint Design for rapid testing as well as assuring direct tensile loading

·         Adjustable alignment plate with built in leveling facility for both vertical and horizontal pulls.

·         Compact design.

·         Easy to use.

·         Standards

o    ISO 4624 Paints and varnishes -- Pull-off test for adhesion

o    EN 1015-12 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrate

o    EN 1348 Determination of Tensile Adhesion Strength for Cementitious Adhesives

o    BS 1881 Part 207 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests

o    ASTM C 1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

o    ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

o    ACI 503-30 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes

o    DIN 1048 Part 2 Testing concrete; testing of hardened concrete (specimens taken in situ)

• Specifications:
•  

以上是美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪的详细信息，如果您对美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪价格、厂家、品牌、型号、图片、规范、规格、原理有疑问，或需要详细报价单、宣传册、中英文产品说明书，请点击我公司

美国NDT James相关产品介绍：

美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪

美国NDT James T-C-10 T-C-20 Cementometer微波水泥含水率测试仪

美国NDT James T-S-30 Aquaprobe微波土壤含水率测试仪

美国NDT James T-M-170 Aquameter混凝土含水率测试仪

美国NDT James T-T-90 Trident插针式微波骨料含水率测试仪

美国NDT James I-CB-6000 Carbo Detect混凝土碳化深度酸碱指示剂

美国NDT James I-AS-3000 ASR-Detect混凝土碱骨料反应测试仪

美国NDT James A-AB-1200 A-AV-1300 A-AA-1100 Air Meters混凝土含气量测试仪

美国NDT JAMES Z-WP-1000 Windsor Probe混凝土强度枪击检测仪

美国NDT JAMES W-P-2000 Windsor Pin混凝土强度检测仪

美国NDT JAMES R-HR-8000 Mini R-Meter钢筋定位仪

美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪

美国NDT JAMES P-C-728 P-C-729 Anchor锚栓测试仪

美国NDT JAMES M-M-3056 Maturity Meter混凝土成熟度测试仪

美国NDT JAMES Datascan MK II钢筋混凝****达

美国NDT James C-P-6000 C-P-6050 Porosiscope混凝土渗气渗水性测试仪

美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪

美国NDT James C-CL-3000 Chlorimeter混凝土氯离子含量测定仪

美国NDT James W-M-350 W-M-250 Rebound Hamme机械回弹仪

美国NDT James W-D-2000 Rebound Hamme数字回弹仪

美国NDT James V-E-1000 E-Meter MK II动态弹性模量测试仪

美国NDT James V-V-100 Vu-Con冲击回波测试仪

美国NDT JAMES V-C-400 V-Meter MK IV混凝土超声波测试仪

美国NDT James C-CS-8000 C-CS-8300 Gecor 8钢筋锈蚀程度测定仪

美国NDT James C-RM-8000 Ohmcorr混凝土电阻率测定仪

美国NDT James C-CM-5000 Cor-Map II大屏幕半电池电压钢筋锈蚀检测仪

美国NDT JAMES R-C-400/450/475/410 Rebarscope钢筋扫描仪