丹富斯动态平衡电动二通阀；流量平衡器与电动控制阀一体，关断力6.8Bar宽压差范围内盘管水流量精度自动恒定模数化流量工厂标定，无需现场平衡调试,电动执行器低噪运转，安装及拆卸十分方便电动执行器仅在动作时间15秒内耗电4VA，动态平衡电动二通阀工作原理在全开或全关位置时机械锁定真正零耗电一体化动态平衡电动二通阀明显降低水系统流动噪声，*解决水力平衡问题，综合节能效果6%-35%。动态平衡电动二通阀工作原理

丹富斯动态平衡电动二通阀技术参数

动态平衡电动二通阀主要技术参数
驱动电源：AC230V±10％，50／60Hz    
功率消耗：6VA  (仅当阀门启、闭时)    
电机类别：同步电机  

动作时间：1 5s    
引线长度：50cm  

公称压力：1.6Mpa  

关闭压差：<0.6Mpa(二通) 、0.3Mpa(三通) 

连接方式：管螺纹G  

适用介质：冷、热水或50％乙二醇溶液

介质温度：2～90℃

Dan fuss dynamic balance electric two-way valve; Flow balance device and electric control valve body, shut off the power 6.8 Bar wide scope of pressure difference inside dish tube automatic constant water flow precision factory calibration, modular flow field balancing without debugging, running low noise electric actuators, installation and removal is very convenient electric actuators only 15 seconds in the action time consumed electricity 4 va, mechanical lock when fully open or close position real zero dynamic balance of electric power integration significantly lower two-way valve flow water system noise, compley solve the problem of hydraulic balance, comprehensive energy saving 6% 35%.

Dynamic balance of electric two-way valve technology parameters

Working power supply

AC 220 v / 50 hz (60 hz)

The transient power

4 the va

Nominal pressure

PN1.6 MPa

Shut down the differential

0.68 MPa

The action time

About 15 s

Working pressure difference

10 ~ 100 kpa or 20 to 200 kpa

Flow deviation

5%

Choose materials

Stainless steel valve core, stainless steel spring, nickel plated copper body surface

Flow module (m3 / h)

0.32 0.40 0.50 0.65 0.80 1.00 1.25

Medium temperature

2 ~ 90 ℃ water

Control signal

Three floating point or two point three line

The connection method

Threaded, 3/4 ", 1 "silk mouth

Connection size

Dynamic balance of electric two-way valve main technical parameters

Drive power supply: AC230V plus or minus 10%, 50/60 hz

Power consumption: 6 va (only when the valve opening and closing)

Motor categories: synchronous motor

5 s action time: 1

Lead length: 50 cm

Nominal pressure: 1.6 Mpa

Closed differential pressure: < 0.6 Mpa (two-way), 0.3 Mpa (tee)

Connection mode: pipe thread G

Applicable medium: cold, hot water or 50% ethylene glycol solution

Medium temperature: 2 ~ 90 ℃