进口S型单级双吸离心泵

进口S型单级双吸离心泵

参考价: 面议

具体成交价以合同协议为准
2022-08-24 08:44:24
287
产品属性
关闭
惠州费希尔阀门有限公司

惠州费希尔阀门有限公司

免费会员
收藏

组合推荐相似产品

产品简介

进口S型单级双吸离心泵是新型节能卧式中开泵,供输送清水或物理化学性质类似于水的其他液体,根据用户需求,通过改变泵结构及材质可用于输送多泥砂水或各类腐蚀性液体,该系列泵适用于工厂、矿山、城市给排水、电站、农田排灌及各种水利工程

详细介绍

进口S型单级双吸离心泵是新型节能卧式中开泵,供输送清水或物理化学性质类似于水的其他液体,根据用户需求,通过改变泵结构及材质可用于输送多泥砂水或各类腐蚀性液体,该系列泵适用于工厂、矿山、城市给排水、电站、农田排灌及各种水利工程。

S-type single-stage double-suction centrifugal pump is a new energy-saving horizontal split pumps for conveying water or physical and chemical properties similar to other liquid water, according to user needs, by changing the pump structure and material can be used for all types of transport more water or silt corrosive liquids, this series of pumps suitable for factories, mines, urban water supply and drainage, power, agricultural irrigation and various water projects.

结构说明Structure Description

 本型泵的吸入口与吐出口均在水泵轴心线的下方,与轴线垂直成水平方向。检修时无需拆卸进出口水管及电机。从传动方向看去,水泵为顺时针方向旋转(根据用户需要亦可改为逆时针方向旋转)。
 泵主要零件有:泵体、泵盖、叶轮、轴、双吸密封环、轴套等。
 泵体与泵盖构成叶轮的工作室。在进出水法兰上,制有安装真空表和压力表的管螺孔。进出水法兰的下部,制有放水的管螺孔。
 经过静平衡校验的叶轮,用轴套和两边的轴套螺母固定在轴上,其轴向位置可通过轴套螺母进行调整。
 泵轴由两个单列向心球轴承支承。轴承装在轴承体内、安装在泵体两端,用黄油润滑。
 双吸密封环用以减少水泵压水室的水漏回吸水室。
 泵通过弹性联轴器由电动机直接传动,必要时亦可用内燃机传动。
 轴封为软填料密封(根据用户需要可采用机械密封结构)。

 Inlet and outlet of the pump is in the bottom of the pump axis line, perpendicular to the horizontal axis. Import and export without removing the pipes and motor overhaul. Viewed from the direction of transmission, the pump is clockwise (according to user needs can also be changed to counter-clockwise).
 Pump main parts: pump, pump cover, impeller, shaft, double suction seal rings, bushings and the like.
 Pump and pump cover constitute studio impeller. Out of the water in the flange, install the vacuum gauge and pressure gauge tube screw. The lower flange out of the water, turn on the water pipe is formed with holes.
 Static balance check impeller, with both sides of the sleeve and the sleeve nut on the shaft, the axial position can be adjusted through the sleeve nut.
 Shaft by two single row radial ball bearing. Bearings mounted in bearing the body, mounted on both ends of the pump body with grease lubrication.
 Double suction seal ring to reduce water pump pressurized water chamber to drain back to the suction chamber.
 Pump through flexible coupling directly by the drive motor, the internal combustion engine can also be used when necessary drive.
 Seal soft packing seal (according to user needs can be mechanical seal).

上一篇:离心泵抽不上水的问题解决方法 下一篇:离心泵试运转及启动前注意事项
热线电话 在线询价
提示

请选择您要拨打的电话: