VisiPro DO 120-上海帝博思生物科技有限公司手机版

详细介绍

品牌	HAMILTON/哈美顿	供货周期	现货

VisiPro DO 120

产品介绍

货号：243420

*根有防爆认证的光学溶解氧氧电极

VisiPro DO 120是*的能够用于防爆区域的光学溶解氧电极。

光学测量原理改善了测量的性能，简化了维护的程序。改善性能是相对于传统的电化学（电流法）电极，不受流速的影响，快速启动无需极化时间，维护十分简单。

内置变送器，电极可以直接和过程控制系统通过4~20毫安信号或者数字信号HART相连接。所有相关的数据，包括校准信息，诊断信息等都储存在电极头中简化了校准和维护的程序，附加的无线通讯功能可以使电极直接和你的电脑相连接，简化了实验室校准、设置和维护程序。

为什么选择VisiPro DO Ex？

简化了校准和维护程序:

Specifications

Measurement Principle	Oxygen dependent luminescence quenching
Measuring Range	4 ppb to 25 ppm (DO) or 0.1 to 600 mbar (pO2)
Oxygen Consumption	None
Required Flow	None
Response Time t98%	< 30 s at 25 °C, from air to nitrogen
Temperature Sensor	NTC 22 kOhm
Drift at Room Temp. under Constant Conditions	< 1 % per week
Configurable Values	DO: mbar; %-sat; %-vol; µg/l; mg/l; ppb/ppm (gas); ppb/ppm (dissolved oxygen); Temperature: °C
Autoclavable	No
CIP	Yes
Steam Sterilizable	Yes, max. temperature 140°C
Process Temperature	-20 to 140 °C; the Sensor provides no DO reading above 85 °C
Pressure Range	0 to 12 bar
O-ring Material	EPDM (FDA approved)
Surface Quality of Steel	Ra < 0.4 µm (N5)
Protection Rating	IP 68
Certificate	Yes, with parameter settings and materials used
Serial Number	Yes
a-length	120 mm
Diameter	12 mm
Process Connection	PG13,5
Electrical Connector	M12
Analog Interface 1	4-20 mA for DO, programmable
4 - 20 mA accuracy	< 0.3% current value + 0.05 mA
4 - 20 mA current range	3.5 to 22 mA
Operating Voltage	18 to 30 VDC
Wetted Parts	Stainless steel 1.4435, Silicone (FDA approved), EPDM
Electrolyte	None
Membrane / Cap	Only compatible with H cap; Cap needs to be ordered separay
Digital HART Interface	HART Version 7.0
Digital HART Interface	HART Version 7.0
Accuracy at 25 °C	1 ± 0.05%-vol: 21± 0.2%-vol; 50 ± 0.5%-vol
Analog Interface	Two wire sink needs to be powered by external power supply