ZMAP型-气动薄膜单座调节阀-上海挺扬自控阀门制造有限公司手机版

详细介绍

一、产品概述Product Overview：

气动薄膜单座调节阀由气动薄膜执行机构和调节阀两大部分组成，它与气动调节器，减压阀、定位器或其他仪表配合使用，达到控制管道内的温度、压力、液位、流量等工艺参数。单座调节阀具有易密封，泄漏量小的优点，但平衡力较大，故工作压差不宜过高。双座调节阀具有流量系数大，不平衡力较小的特点，因而使用广泛.

Thin-film single-seat pneumatic control valve by the pneumatic diaphragm actuator and control valve of two parts, with pneumatic regulator, reducing valve, positioning, or used in conjunction with other instruments, to control the temperature inside the tubes, pressure, level, flow and other process parameters. Single-seat control valve with easy to seal, leakage of small advantages, but a large counterweight, the working pressure should not be too high. Seat valve with a flow coefficient, the unbalanced force of smaller features, which are widely used.

二、性能参数Performance parameters：

DN/mm			PN		环境温度Ambient temperature/℃	固有流量特性 Inherent flow characteristic		气源zui大压力Maximum pressure gas source/MPa
25～300			16，40，64		-30～60	直线、等百分比Linear, equal percentage		0.25
DN /mm	流通能力Flow capacity		行程/mm	配用执行器型号 Models equipped with actuators		灰铸铁阀 Gray cast iron valve
	单座Single-seat	双座Seat				PN	工作压力/MPa		介质温度Medium temperature/℃
25	8	10	16	ZMA-2		16	1.6		≤200
32	12	16
40	20	25	25	ZMA-3
50	32	40
65	50	63	40	ZMA-4
80	80	100
100	120	160
125	200	250	60	ZMA-5
150	280	400
200	450	630
250		1000	100	ZMA-6
300		1600

三、主要零件材料Materials for main parts:

PN	阀体、上阀盖、下阀盖 Valve body, bonnet, under bonnet	阀芯、阀杆、阀座 Valve, stem, seat	垫片 Gasket	填料 Filler
16	HT200	1Cr18Ni9	石棉橡胶板 Asbestos Rubber Sheet	聚四氟乙烯 PTFE
40	ZG25	1Cr18Ni9
64	1Cr18Ni9	1Cr18Ni9

产品简介

详细介绍