海绵硬度压陷测试仪制作标准：  
           GB10802软质聚氨醋泡沫塑料           
           GB10807-2006 软质泡沫聚合材料压陷性能测试标准

海绵硬度压陷测试仪主要适用于软质泡沫聚和材料如：海绵、泡沫等压陷硬度在国家标准要求的A法、B法、C法下对标准尺寸的海绵、泡沫等试样进行标准的测试，测出海绵、泡沫等材料的压陷硬度。

海绵硬度压陷测试仪采用计算机控制，可对试验过程中的各种数据进行快速、准确的采集、处理，并可存取、显示、打印，精准的曲线力值双向显示更直观的显示式样的测试结果 采用精密嵌入式cpu控制方式也可直接测定座椅靠背等 不规则海绵

海绵硬度压陷测试仪主要方法：用户可按照要求选择方法 以设定速度加入式样测得压入量的力值测得zui大力值记录当下力值 在以设定速度返回  

压陷量预先设定,通过计时电路精确控制压陷量;            
 使用方便：采用高精度压力传感器和大规模集成电路；
 测定精确：提供三种测定压陷硬度的方法；

可选方法分为三种：A 法B法 C法用户自行设定

海绵硬度压陷测试仪技术参数

（1）、速度：100mm/min； ±20mm  
（2）、压陷硬度测定范围:0-2000.0 N
（3）、测力zui小分辨率:0.25 N  
（4）、测定误差:<1%

（5）、zui大行程3500mm 可根据客户要求

（6）、压头直径200mm

（7）、实验平台 500*600/mm

（8）、放气孔分布直径 250*250/mm

（9）、整机尺寸 500*600*800/mm

（10）、供电方式220V/50Hz

海绵硬度压陷测试仪功能特点

海绵硬度压陷测试仪主要配置：    

    测试主机一台 

    压盘一支   

   传感器一支（200公斤轮辐式）

   计算机/EPC    

   彩色喷墨打印机一台

    控制软件一套

   电源线   一条 

Production standard: 
GB10802 soft polyurethane foam vinegar 
GB10807-2006 soft foam polymeric material sag performance testing standards 
 
 
 
Is mainly suitable for soft foam polyethylene and materials such as sponge, foam, such as sag hardness in the national standard requirements by the method of A, B, C standard size of sponge, foam, such as sample standard test, measure the pressure of sponge, foam materials such as hardness. The instrument adopts computer control, to test the various data in the process of rapid and accurate collection, processing, and can access, display, print, the curve of the precise force value two-way display more intuitive display style of the test results Adopts precision embedded CPU control method can also be directly backrest, etc Irregular sponge 
 
 
 
Main methods: the user can choose according to the requirements method Measured in the set speed to join fashion strength measured the amount of pressure into the most strongly values recorded when the dint value Back in the set speed 
 
 
 
Sag amount preset, through accurate control timing circuit sag; 
Easy to use: pressure sensor with high precision and large scale integrated circuit; 
Determination of accurate: provide three methods of determination of sag hardness; 
 
Optional method is divided into three types: A method of B C users to set 
 
 
 
Technical parameters 
 
(1), speed: 100 mm/min. Plus or minus 20 mm 
(2), sag stiffness measurement range: 0-2000.0 N 
(3), minimum load resolution: 0.25 N 
(4), measuring error: < 1% 
 
(5), the maximum 3500 mm can according to customer's requirements 
 
(6), the pressure head diameter is 200 mm 
 
(7), 500 * 600 mm/experiment platform 
 
(8), vent hole diameter distribution of 250 * 250 / mm 
 
(9), the machine size 500 * 600 * 600 / mm 
 
(10), the power supply of 220 v / 50 hz 
 
 
 
Functional features 
 
Automatic reset 
 
Computer received instructions after the beginning of the experiment, the system automatically reset. 
 
overload 
 
When the load exceeds rating automatic stop. 
 
limit 
 
With SPC and mechanical limit. 
 
The results of 
 
Test results can access, analyze the data curve. 
 
According to 
 
Dynamic display of data and curve test process. 
 
appearance 
 
Professional graphic design and easy, simple 
 
The control method 
 
Can choose according to the need of experimental test, the test speed, displacement, strain test method, etc 
 
Calibration value for 
 
The system can realize a strength of accurate calibration. 
 
Change the speed 
 
The machine according to different samples, arbitrarily change the test speed. 
 
Automatic shift 
 
According to the size of the load, it can switch different gear, to ensure the accuracy of measurement. 
 
Automatic return 
 
The test is finished, return to the initial position. 
 
The control mode 
 
Can players control/computer/EPC 
 
Storage test 
 
Automatic storage Easy to obtain 
 
Communication methods 
 
RS232 / USB/Asia Pacific network port (optional) 
 
 
 
 
 
Main configuration: 
 
The test host 
 
Pressure plate a 
 
A sensor (200 kg hub-and-spoke) 
 
Computer/EPC 
 
Color ink jet printer 
 
A set of control software 
 
The power cord a