【敦品工业】提供GEARENCH PETOL SURGRIP摩擦钳,GEARENCH摩擦钳,ZV35-52摩擦钳,ZV35-54摩擦钳,ZV55-54摩擦钳。陈先生。PETOL SURGRIP Friction Vise摩擦钳为油田泵制造商和泵修理厂提供具有优异的非破碎和非破坏特征的摩擦虎钳，用于地下泵的最终组装或修理。

SURGRIP摩擦钳有两种尺寸，ZV35-52和ZV55-54。 苏州敦品陈明鹏CMP315提供可互换的铝衬套可满足特定的O.D. 要求。

ZV55-54 PETOL SURGRIP摩擦虎钳可以配备特殊的适配器衬套，使其能够处理ZV35-52的所有较小的O.D..

注意：虎钳板，虎钳板螺栓和螺母以及虎钳衬套必须单独订购。

PART NO.	ITEM DESCRIPTION	WEIGHT
ZV35-54	Friction Vise w/4" Nut	47 lbs.
ZV55-35-1	Friction Vise Plate	9-5/8 lbs.
HB64	Friction Vise Plate Bolt & Nut Assembly (4 req'd. per vise)	2 ozs.
ZV35-1-1	Riser Pad (4 req'd. per vise)	2 ozs.
HP302	Friction Vise Plate Lock Pin	4 ozs.
ZV55-54	Friction Vise w/4" Nut	68 lbs.
ZV55-35-1	Friction Vise Plate	9-5/8 lbs.
HB39	Friction Vise Plate Bolt & Nut Assembly (4 req'd. per vise)	2 ozs.
HP302	Friction Vise Plate Lock Pin	4 ozs.
ZUV55-35A	Friction Vise Adaptor Bushings (includes 2 ea. ZUV55-35B-8)	8-1/8 lbs.
ZUV55-35B-8	Friction Vise Adaptor Bushing Plunger Assembly	1-3/4 ozs.

WARNING!
Do Not Exceed Maximum Working Load!
Overloading may result in SERIOUS INJURY or DEATH!
Always use a load cell or other calibrated indicating device to monitor the line pull on the tong to avoid overload. Do not operate without a manual. Follow OSHA, NSC, etc. standards, safe practices, & procedures.
警告!
不要超过工作负荷!
超载可能导致严重的伤害甚至死亡!
总是使用测压元件或其他校准的指示装置来监测大钳上的线拉力，以避免过载。不要在没有使用手册的情况下操作。遵守OSHA, NSC等标准，安全操作和程序。
虎钳衬套选型表：

ZV35-54虎钳衬套选型表：			ZV55-54虎钳衬套选型表：
Part No.	O.D.	Weight	Part No.	O.D.	Weight
ZUV35:0.625	0.625"	5-1/4 lbs.	ZUV55:3.000	3.000"	8-3/4 lbs.
ZUV35:0.688	0.688"	5-1/8 lbs.	ZUV55:3.125	3.125"	8-1/2 lbs.
ZUV35:0.875	0.875"	5 lbs.	ZUV55:3.250	3.250"	8-1/8 lbs.
ZUV35:1.000	1.000"	5 lbs.	ZUV55:3.375	3.375"	7-3/4 lbs.
ZUV35:1.062	1.062"	4-7/8 lbs.	ZUV55:3.500	3.500"	7-3/8 lbs.
ZUV35:1.125	1.125"	4-7/8 lbs.	ZUV55:3.625	3.625"	7-1/8 lbs.
ZUV35:1.250	1.250"	4-3/4 lbs.	ZUV55:3.750	3.750"	6-3/4 lbs.
ZUV35:1.312	1.312"	4-5/8 lbs.	ZUV55:4.000	4.000"	6 lbs.
ZUV35:1.375	1.375"	4-1/2 lbs.	ZUV55:4.125	4.125"	5-5/8 lbs.
ZUV35:1.438	1.438"	4-1/2 lbs.	ZUV55:4.250	4.250"	5-1/8 lbs.
ZUV35:1.500	1.500"	4-3/8 lbs.	ZUV55:4.500	4.500"	4-1/4 lbs.
ZUV35:1.625	1.625"	4-1/4 lbs.	ZUV55:4.750	4.750"	3-1/4 lbs.
ZUV35:1.688	1.688"	4-1/8 lbs.	ZUV55:4.775	4.775"	2-3/4 lbs.
ZUV35:1.750	1.750"	4 lbs.	ZUV55:5.000	5.000"	2-1/4 lbs.
ZUV35:1.812	1.812"	4 lbs.	ZUV55:5.250	5.250"	1-1/4 lbs.
ZUV35:1.875	1.875"	3-7/8 lbs.	适配器衬套
ZUV35:2.000	2.000"	3-5/8 lbs.	ZUV55-35A	--	8-1/8 lbs.
ZUV35:2.062	2.062"	3-5/8 lbs.
ZUV35:2.125	2.125"	3-1/2 lbs.
ZUV35:2.250	2.250"	3-1/4 lbs.
ZUV35:2.312	2.312"	3 lbs.
ZUV35:2.375	2.375"	3 lbs.
ZUV35:2.500	2.500"	2-3/4 lbs.
ZUV35:2.625	2.625"	2-3/8 lbs.
ZUV35:2.750	2.750"	2-1/8 lbs.
ZUV35:2.875	2.875"	1-7/8 lbs.
ZUV35:3.000	3.000"	1-1/2 lbs.
ZUV35:3.125	3.125"	1 lbs.
ZUV35:3.250	3.250"	3/4 lbs.