进口圆盘式疏水阀-德国进口圆盘式疏水阀 
进口圆盘式疏水阀、进口蒸汽疏水阀、德国LIK型号结构、尺寸阀标准
德国莱克LIK圆盘式疏水阀
装置刚启动时，首先在较低的压力下空气和冷凝水流过疏水阀，通过入口孔托起阀片，再由出口孔排出，当压力、温度上升后，内压上升，推动凝结水量增多，而增大流速，这时阀片下的静压降低，使阀片下落，蒸汽从出口孔中间由四周流向阀片和阀盖之间的间隙，进入压力室，将阀片压在密封环上，关闭阀门。当压力室的蒸汽温度降低，开始冷凝，使压力室内的压力降低，进口压力托起阀片，疏水阀开启进行排水。
Disc Trap
When starting the device, firstly, the air and condensed water will flow across steam trap under rather low pressure, and lift valve plate through the entrance hole, and then discharge from the exit hole. After the pressure and temperature rise, the inner pressure will also rise, and cause increased amount of condensed water and increased flow rate, at the moment, the static pressure of valve plate declines which causes the drop of valve plate, and then, the steam flows from all directions via the exit hole into the gap between the valve plate and the valve cover. After steam enters the pressure chamber, it shuts down the valve by pressing valve plate onto the sealing ring. When the steam temperature inside the pressure chamber begins descending and the steam begins to congeal, the pressure declines in the pressure chamber, and the inlet pressure lifts the valve plate, and then the steam trap opens and discharges water.
优点：
1、结构简单，容易安装和维修，抗水击。
2、抗水击，对压力突然变化没有影响。
3、可用于过热蒸汽系统。
4、可以使用高压高温的蒸汽管线。
Merits
1.Simple structure, easy installation and maintenance and water hammer resistant.
2.Water hammer resistant and no effect from abrupt change of pressure.
3.Adoptable for overheat steam system.
4.Adoptable for high-pressure and high-temperature steam pipes.
技术参数/Technique parameter
壳体压力等级
Shell pressure grade    负荷泄漏率
Load leakage rate    使用介质
Used medium    壳体材质
Shell material    允许背压率
Permitted backpressure rate
1.6～42MPA    0.3%    蒸汽、凝结水
Steam、Condensate water    锻钢、不锈钢、合金钢
Forged steel、Stainless steel、Alloy steel    50%
zui大工作压差
Maximum operating pressure differential    使用过热蒸汽
Use superheated steam    zui高允许温度
Maximum allowable temperature    抗水击
Resist    压力变化范围
Pressure change range
17MPA    优秀
Excellence    420~550℃    适应
Adaption    适应
Adaption
主要零件材料/The materials of primary accessories
零部件名称Part and component name     材质Material
阀体、阀盖Valve body、Valve cover    锻钢、不锈钢、合金钢Forged steel、Stainless steel、Alloy steel
阀片Valve plate    高铬不锈钢High chrome stainless steel
阀座Valve seat    STL合金STL alloy
过滤网Filtrating screen    不锈钢Stainless steel