波纹填料

Corrugated filler

一、产品介绍（Product introduction）

主要是取代塔内散堆填料，解决阻力大、比表面积小，传质效能差、易破碎等突出问题。它规定了气液流路．改善了淘流、壁流和润湿性能．降低了阻力，同时提供更多的气液接触面积从而提高了传质，传热效果。

It is mainly to replace the bulk packing in the tower, and solve the outstanding problems such as large resistance, small specific surface area, poor mass transfer efficiency, and easy to break. It regulates the flow path of gas and liquid. Improved arsion, wall flow and wetting performance. Reduced resistance while providing more gas-liquid contact area thus improving mass and heat transfer.

比表面积大、孔隙率高、重量轻，填料效率高；气相通路倾角小，有规则的气相通路，压力损失小，填料压降低；径向扩散良好汽液接触充分。

Large specific surface area, high porosity, light weight, high packing efficiency; The inclination angle of the gas phase path is small, there is a regular gas phase path, the pressure loss is small, and the packing pressure is reduced; Radial diffusion is good for vapor-liquid contact sufficient.

二、产品用途（Product Usage）

一般用于同位素分离或需要大量理论板数的难分离物系的精密分馏，也可用于高度爱到严格限制或要求达到高纯度产品的场合。

It is generally used for precision fractionation of isotope separation or difficult to separate material systems that require a large number of theoretical plates, and can also be used in situations where highly loved to strictly limit or require high purity products.

应用于石油化工、如炼油厂催化裂化提馏段、化肥、天然气、生物化工、环境工程等广大领域。

Applied in petrochemical industry, such as refinery catalytic cracking distillation section, fertilizer, natural gas, biochemical, environmental engineering and other fields.

三、适用范围（Scope of application）

可广泛用于煤气洗涤塔．焦化洗涤，洗苯、洗氨培、化肥热气饱和、脱硫酸、硫酸干燥、吸收塔等。

Can be widely used in gas scrubbers. Coking washing, benzene washing, ammonia washing, fertilizer heat saturation, desulfurization, sulfuric acid drying, absorption tower, etc.

填料在塔呐构成均匀的几何图形排列,规定了汽液流路,改善了沟流及壁流现象.由于丝网的毛细作用，又使表面积有更为有效的润湿性能，有低的压降和少的持液量,因此具有很高的分离效率。特别适用于难分离物系及热敏性物系。The packing materials form a uniform geometric arrangement in Tano, which specifies the flow path of vapor and liquid, and improves the phenomenon of ditch flow and wall flow. Due to the unique capillary effect of the screen, the surface area has a more effective wetting performance, with low pressure drop and less liquid holding capacity, so it has a high separation efficiency. It is particularly suitable for refractory and heat-sensitive systems.

四、技术指标（Technical specifications）