零空气发生器-零空气发生器-上海美盛自动化设备有限公司手机版

详细介绍

零空气发生器
性能和益处:
1,代替了代价高昂的危险气瓶
2,显著地节省气瓶
3,安装简单，无特殊要求
4,*的控制和安全系统的自动转换开关
5,满足所有的标准和法规

Zero-Air-Generators

Features & Benefits

Eliminates costly dangerous gas cylinders
Significant savings over cylinders
Simple installation, no special requirements
Constant purity with no fall off in performance
Sophisticated control and safety system with automatic changeover switch
Meets all standards and regulations

Technical Details

For GC-FID there are six new models in the SMART series to produce zero air of the highest possible purity from compressed air. All models are absolutely noiseless and easy to install. The generators continously produce zero-air with hydrocarbon content < 0,1 ppm (measured as methane). They cover requirements for zero-air for up to 160 FID´s at outlet pressures between 2 bar and 10 bar. Using modern filter technology to remove particles, water and oil-vapors, the generator works with your compressed air. The catalytical chamber stage than removes disturbing traces of hydrocarbon. Maximum air flow rate, gas/air supply, required temperature in the reactor and electrical requirements are checked and supervised continiously. If there is a fault or crossover of the critical values an alarm is given immediately via relays corresponding to ISO 9000. If the generators detect a fault they automatically switch over to back-up gas cylinders or cut off the gas delivery to the lab. The user can then eliminate the fault and reset the alarm. Even the biggest model delivers up to 50 l/min zero air of constant high purity, within 10 minutes of starting.

Benefits

Absolutely even base line in the apparatus, with practically no peaks.
Highest possible gas quality equivalent to UHP-gases; significant savings over gas cylinders.
Low inlet air pressure allows the generator to be located at point of use in the lab, i.e. where the pure gases are needed.
Enourmous saving of space and time.
Automatic switchover to back-up-cylinders when a fault is detected by the system.

Compressed air supply

All models of the SMART series are available with an external low noise and oil-less air compressor for permanent use (< 55 dbA).

Type	ZA 2000	ZA 4000	ZA 7500	ZA 20 K	ZA 35 K	ZA 50 K
Max. Air Flow Rate (ml/min)	2000	4000	7500	20000	35000	50000
Max. Inlet Hydrocarbon Concentr.	100 ppm (as CH4)
Outlet Hydrocarbon Concentration	< 0,1 ppm (as CH4)
Outlet Port (Swagelok)	Without display		With display
Electrical Requirements	230V/50Hz
Start Up Time	ca. 10 min.
Energy Consumption (W/h)	< 30	< 50	< 80	< 100	< 130	< 150
Power Take-Up (at switch-on)	420 W			1600 W
Dimensions (H x W x D)	270 x 340 x 460mm			330 x 460 x 560mm
Shipping Weight (kg)	13	15	19	25	28	32

Options

Flowmeter
Pressure-gauge
Temperature OK/stａnd by (LED view of catalyst)
Potentialfree contacts without hold-function
Voltage Failure
Failure Air/ Gas- Supply (1 to 8 bar adjustable)
Overheating in the Catalytical Chamber
Exceed of maximum
Flow Capacity
Potentialfree contacts with hold-function
Example: In case of "Failure Air/Gas-Supply", which means no pressure out of the compressor, immediately an alarm is given via relais. After elimination of the fault the alarm has to be quit manually and the generator starts service again.
Reaction to fault detection
gas delivery cut-off
automatic switchover to back-up cylinders

Download Specification

产品简介

详细介绍