YUKEN叠加式溢流阀,好中国台湾YUKEN叠加式溢流阀

导泄油口避免连接导泄油口与可能的冲击压力线
Check that the drain back pressur
Toavoid preselected pressureinstability
为了进行流量调节松开锁紧螺母
压缩弹簧使阀瓣关闭只要下游无水流动
Sub-plates are available Specify
务必在调整后重新锁紧螺母拧紧压力
调整Pressure ControlState(2.6 U.
S.GPM)orhigher for nominal sizes

YUKEN叠加式溢流阀,好中国台湾YUKEN叠加式溢流阀
然后打开流量调节螺栓顺时针减小请
useapassing flow rate of10
dosenot exceed 0.2 MPa (29 PSI)
WhenRelief Valve Passing Flow Rate
当排水连接与制衡功能当个具有
阀背压函数用于内部漏型背压控制阀进行
ecause the minimum adjustment
pressure varies with the tanklin
e back pressure, add the tankline back pressure
to the value on the following lines
achined finish.更细的线路滤波器
外部导泄油型的导压力必须始终超过主压港“P”的压力