PLC101型自动馏程测定仪PLC101automaticdistillationrangemeasuringinstrument

PLC101型自动馏程测定仪PLC101automaticdistillationrangemeasuringinstrument

参考价: 面议

具体成交价以合同协议为准
2023-10-03 10:00:51
153
产品属性
关闭
吉林市普锐特科技有限责任公司

吉林市普锐特科技有限责任公司

免费会员
收藏

组合推荐相似产品

产品简介

本仪器是集机械、光学、电子于一体的高科技产品,采用德国原装测温传感器,自动控制蒸馏速率、回收体积,初馏点、干点自动检测、大气压力自动检测,结果自动计算,超温可自动保护、自动灭火,量筒浴控温范围:0~60℃,电炉丝低电压大电流供电,冷浴温度:0~60℃;自动大气 ...

详细介绍

PLC101型自动馏程测定仪
适用标准:GB/T 6536 ASTM D86 GB/T255 GB/T7534 GB/T3146等
产品说明:
本仪器是集机械、光学、电子于一体的高科技产品,采用德国原装测温传感器,自动控制蒸馏速率、回收体积,初馏点、干点自动检测、大气压力自动检测,结果自动计算,超温可自动保护、自动灭火,量筒浴控温范围:0~60℃,电炉丝低电压大电流供电,冷浴温度:0~60℃;自动大气压力校正,可自动完成蒸镏全过程实验。
广泛应用于:
原油馏程测定、焦油馏程测定、汽油馏程测定、柴油馏程测定、石脑油馏程测定、洗油馏程测定、煤油馏程测定、燃料油馏程测定、重油馏程测定、矿物油馏程测定、苯类馏程(沸程)测定、醇类馏程(沸程)测定、醚类馏程(沸程)测定等等需要蒸馏实验的产品。
本仪器可由计算机监控(无线/有线通讯方式,由用户选配)。
本仪器结构合理,性能稳定,操作简单,是理想的分析检测设备。
主要技术指标:
 测温范围:室温~400℃ 分辨率:0.1℃
 水浴恒温范围:0~60℃(进口压缩机制冷)
 内部循环回收量筒周界温度:5~50℃
 蒸馏速率:4~5ml/min
 体积检测范围:0~150ml 分辨率:0.1ml
 测温元件:PT100(德国原装测温传感器)
 显示:640×480真彩色大屏幕汉字显示
 加热方式:红外线辅射加热
 打印:40列汉字点阵打印
 消耗功率:小于 1kw
 制冷方式:压缩机制冷(法国DANFOS)
 环境温度:15~35℃
 操作方式:程序启动,操作简单
主要特点:
 智能加热管理系统,确保蒸馏速率符合实验方法
  要求。
 记录点用户自行设定:
  ①用户可设定记录对应温度的回收体积
  ②用户可设定记录对应回收体积的温度
  ③自动记录国标规定的记录点
 四种实验结束方式:
  ①终点结束:检测到终馏点时结束实验
  ②干点结束:检测到干点时结束实验
  ③温度结束:根据用户设定的温度值结束实验,
   并打印输出。
  ④体积结束:根据用户设定的体积值结束实验,
   并打印输出。
  大气压力自动检测
  超温可自动保护、自动灭火

PLC101 Automatic Distillation Analyzer
Applicable standards: GB / T 6536 ASTM D86 GB/T255 GB/T7534 GB/T3146 etc.
Product Description:
  This instrument is a mechanical, optical, electronic high-tech products, using the German original temperature sensors, automatic control distillation rate, recycling volume, initial boiling point, dry point automatic detection, automatic detection of atmospheric pressure, the result is calculated automatically, ultra- Automatic temperature protection, automatic extinguishing cylinder bath temperature range: 0 ~ 60 ℃, electric wire low voltage and high current power supply, cooling bath temperature: 0 ~ 60 ℃; automatic barometric pressure correction, can automatically complete the whole process of distillation experiments. Widely used:
Determination of distillation range of crude oil, tar distillation range determination, gasoline boiling range determination, determination of distillation range of diesel, naphtha, distillation range determination, determination of distillation range of wash oil, kerosene distillation range determination, determination of distillation range of fuel oil, heavy oil distillation range determination of mineral oil distillation range determination, benzene distillation process (boiling range) measured alcohol distillation process (boiling range) determination, ethers Distillation (boiling range) Experimental determination of the distillation of products and so on need.
The instrument can be a computer monitor (wireless / wired communication, by users choice).
This instrument is a reasonable structure, stable performance, simple operation, is an ideal detection equipment.
The main technical indicators:
Temperature range: room temperature ~ 400 ℃ Resolution: 0.1 ℃
Water bath range: 0 ~ 60 ℃ (Imported compressor refrigeration)
Internal recycling cylinder perimeter temperature: 5 ~ 50 ℃
Distilling rate: 4 ~ 5ml/min
Volumetric detection range: 0 ~ 150ml Resolution: 0.1ml
Temperature components: PT100 (German original temperature sensor)
Display: 640 × 480 true color large-screen display of Chinese characters
Heating: infrared radiated heat
Printing: 40 character dot matrix printing
Power consumption: less than 1kw
Cooling: Compressor cooling (France DANFOS)
Ambient temperature: 15 ~ 35 ℃
Mode of operation: the program starts, simple operation
Main features:
Intelligent heat management system to ensure that the distillation rate is consistent with experimental methods
Requirements.
Users set their own record points:
① Users can set the volume corresponding to the record temperatures recycling
② user can set the temperature corresponding to the record volume recovery
③ automatically record GB prescribed record points
Four kinds of end of the experiment by:
① endpoint End: The end point is detected when the end of the experiment
② dry point End: end point detection experiments dry
③ Temperature End: According to the end user set temperature experiments,
And print output.
④ Volume End: According to the value of the end user to set the volume of the experiment,
And print output.
  Automatic detection of atmospheric pressure
  Automatic over-temperature protection, automatic fire extinguishing

上一篇:西门子plc自动控制系统使用前景及优势 下一篇:无负压ABB变频控制柜接线图及故障问题调试方法
在线询价
提示

请选择您要拨打的电话: