品牌
其他厂商性质
所在地
调节阀概述 Regulating valve summary
上海红阀的ZAZPF系列电动电动单座衬氟调节阀是由美国培训回国的技术、工程师,采用的技术制作而成。由于该阀接触介质的部位全衬有氟塑料,又采用聚四氟乙烯材质的波纹管密封,可广泛适用于对有毒、易挥发等气体、液体介质和酸、碱等强腐蚀介质的过程进行控制、调节。以 DKZ型电动执行机构或电子式电动执行机构和衬氟塑直通调节阀阀体两部分组成。
ZAZPF series electrical fluorin plastic lined control valve,it's consist of DKZ type
electrical actuator and valve body,all parts contact with medium is lining fluorin plastic,
and also adopt PTFE material bellow sealing,it is widely used for controlling and
modulating strong corrosion medium such as acid and alkali etc.
特点 Features
1.密封性能好:选用聚四氟乙烯原料的波纹管和填料两层密封,保证无渗漏。
2.走漏量小:因为阀芯、阀座是软密封,故走漏量极小。
3.耐腐蚀:阀体内腔、阀芯、阀座、阀杆均包衬2.5~3mm厚的F46,能耐酸、碱,耐强腐蚀。
Corrosion-resistant:
1.Seal good performance:adopt PTFE material bellow and packing dual sealing,insure no leakage.
2.Small amount of leakage: because of disc and seat is soft sealing, leakage rate is too small.
3.valve inner bore and stem all lining FEP with 3mm thick-ness,to anti-strong corrosion medium such as acid and alkali.
结构特征 Structure features
lt can match with kinds of domestic or foreign electrical actuator according to client's requirements,as the below diagram:
流量特性示意图 Sketch map of flow characteristic
规格与技术参数 Specifications and technical parameters
公称通径DN(mm) Nominal diameter | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||||
阀座直径DN(mm) Seat diameter | 10 | 12 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
额定流量参数 Fixed low data(Kv) | 直线 Line type | 1.8 | 2.8 | 4.4 | 6.9 | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 | 1100 | 1760 |
| 等百分比 Rank percent type | 1.6 | 2.5 | 4.0 | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 1000 | 1600 |
额定行程L(mm) Rated trip | 10 | 16 | 25 | 40 | 60 | 100 | |||||||||||
公称压力PN(MPa) Nominal pressure | 0.6、1.0、1.6、2.5 | ||||||||||||||||
固有可调比(R) Adjustable than inherent |
30:1 | ||||||||||||||||
工作温度T(℃) Working temperature |
-30℃~+150℃ | ||||||||||||||||
作用方式 Role mode |
电开式(K常开);电关式(B)Electrical open type(K normal usage),Electrical closetype(B) | ||||||||||||||||
输入信号范围 lnput signal range | 0~10Madc; 4~20mmADC | ||||||||||||||||
供电电源 Power supply | 220V 50~60HZ | ||||||||||||||||
防爆等级 Explosion-proof grade | 普通型、防爆型 Ordinary type Explosion-proof type | ||||||||||||||||
泄漏等级 Leakage level | VI | ||||||||||||||||
固有流量特性 The inherent characteristics of traffic |
直线、等百分比(Line type or rank percent type) |
主要零部件材料 Material for main parts
零件名称Parts name | 材料 Material |
阀体、阀盖Body,Cap | HT200、ZG230-450、ZG1Cr18Ni9Ti |
衬里材料Lining material | F46、F4、F3、PO、PE、X、X3、PFA |
阀芯 Valve core | 1Cr18Ni9Ti |
波纹管 Bellow | F4 |
填料 Packing | 聚四氟乙烯、柔性石墨 Teflon,Flexible graphite |
弹簧 Spring | 60Si2Mn |
膜盖 Membrane | A3 |
阀杆、推杆 Stem,Putters | 2Cr13/1Cr18Ni9Ti |
衬套 Bushing | 2Cr13 |
主要性能指标 Main performanceindices
零件名称Parts name | 材料 Material |
阀体、阀盖Body,Cap | HT200、ZG230-450、ZG1Cr18Ni9Ti |
衬里材料Lining material | F46、F4、F3、PO、PE、X、X3、PFA |
阀芯 Valve core | 1Cr18Ni9Ti |
波纹管 Bellow | F4 |
填料 Packing | 聚四氟乙烯、柔性石墨 Teflon,Flexible graphite |
弹簧 Spring | 60Si2Mn |
膜盖 Membrane | A3 |
阀杆、推杆 Stem,Putters | 2Cr13/1Cr18Ni9Ti |
衬套 Bushing | 2Cr13 |
主要连接尺寸 Main connection dimemsions
主要技术参数 Main technical parameter
公称通径 Nominaldiameter | 标准值 Standard | 参考值 Reference | ||||||||
DN(mm) | PN1.0 PN1.6 | |||||||||
L | D | D1 | D2 | f | b | Z-Φd | D0 | H | ||
15 | 130 | 95 | 65 | 45 | 2 | 14 | 4-Φ14 | 460 | 673 | |
20 | 150 | 105 | 75 | 55 | 2 | 16 | 4-Φ14 | 460 | 673 | |
25 | 160 | 115 | 85 | 65 | 2 | 16 | 4-Φ14 | 460 | 698 | |
32 | 180 | 135 | 100 | 78 | 2 | 18 | 4-Φ18 | 460 | 720 | |
40 | 200 | 145 | 110 | 85 | 3 | 18 | 4-Φ18 | 460 | 723 | |
50 | 230 | 160 | 125 | 100 | 3 | 20 | 4-Φ18 | 460 | 740 | |
65 | 290 | 180 | 145 | 120 | 3 | 20 | 4-Φ18 | 530 | 850 | |
80 | 310 | 195 | 160 | 135 | 3 | 22 | 8-Φ18 | 530 | 866 | |
100 | 350 | 215 | 180 | 155 | 3 | 22 | 8-Φ18 | 530 | 884 | |
125 | 400 | 245 | 210 | 185 | 3 | 24 | 8-Φ18 | 530 | 1040 | |
150 | 480 | 280 | 240 | 210 | 3 | 24 | 8-Φ23 | 530 | 1065 | |
200 | 600 | 335 | 295 | 265 | 3 | 26 | 8-Φ23 | 530 | 1090 | |
250 | 622 | 390 | 350 | 320 | 3 | 28 | 12-Φ23 | 630 | 1256 | |
300 | 698 | 440 | 400 | 368 | 4 | 28 | 12-Φ23 | 630 | 1520 |
咨询或订购 ZAZPF 电动单座衬氟调节阀 时需提供一下参数: | |
· | 调节阀的型号,老客户如需再次订购可直接提供合同编号。 |
· | 调节阀的口径(螺纹可提供螺纹直接,法兰需提供法兰孔距离尺寸)。 |
· | 调节阀是否需配套附件或辅助设备,如需请注明。 |
· | 调节阀产品的工作压力(额定压力)。 |
· | 调节阀使用介质(是否带有杂质),以及介质温度。 |
服务承诺 | |
· | 产品严格按照国家 GB标准、HG 标准及美国 API 等标准设计、制造、验收。密封面硬度达到国家规定要求,宽度超过国家标准。 |
· | 红阀产品质保期为自出厂起 12 个月,(认为损坏除外)。 |
声明:本文中所有文字、数据、图片均只适用于参考,ZJHPF 气动薄膜单座衬氟调节阀性能参数、结构尺寸参数、价格等详情,请联系我们,电话:。 |