170190-01E  隔离器终端底座

170190-01E 隔离器终端底座

参考价: 面议

具体成交价以合同协议为准
2024-05-01 08:07:15
100
产品属性
关闭
厦门雄霸电子商务有限公司

厦门雄霸电子商务有限公司

免费会员
收藏

组合推荐相似产品

产品简介

特点:FieldMonitor危险区域解决方案支持本质安全传感器安装没有外部安全屏障兼容170190双电隔离器本特利内华达1701/06隔离器终端底座和170190双电隔离器是FieldMonitor危险区域解决方案,支持本质安全传感器安装,没有外部安全屏障。

详细介绍

详情介绍:170190-01E 隔离器终端底座

特点:
FieldMonitor危险区域解决方案
支持本质安全传感器安装没有外部安全屏障
兼容170190双电隔离器

本特利内华达1701/06隔离器终端底座和170190双电隔离器是FieldMonitor危险区域解决方案,支持本质安全传感器安装,没有外部安全屏障。

1701/06隔离器终端底座(ITB)和170190双电隔离器是FieldMonitor*危险区域解决方案,支持本质安全传感器安装,没有外部安全屏障。您必须将FieldMonitor ITB及其相关模块定位在非危险,2区或2区区域,而连接的传感器可能位于1区,1区或0区区域。
170190双电隔离器直接安装到ITB中。该模块消除了,安装和连接外部安全屏障,或建立和维护齐纳安全屏障所需的本质安全接地的需要。两种电隔离器版本可用:
该170190-01兼容170133和170172内部双近端*传感器。它还适用于我们的大多数标准Bently Nevada*外部Proximitor传感器,速度传感器,Velomitor*传感器和使用170180传感器I/O模块的加速度计。
该170190-02是专门设计用于与CEC 4-131和等效的速度传感器。
注:可选电缆组件(p/n 138925),当缓冲的动态输出需要路由到外部配线板,或任何其他需要动态信号的设备。

170115

Features:
  • FieldMonitor Hazardous Area Solutions
  • Support Intrinsically Safe Transducer Installations Without External Safety Barriers
  • Compatible with 170190 Dual Galvanic Isolator

The Bently Nevada 1701/06 Isolator Terminal Base and 170190 Dual Galvanic Isolator are the FieldMonitor hazardous area solutions that support intrinsically safe transducer installations without external safety barriers.

The 1701/06 Isolator Terminal Base (ITB) and 170190 Dual Galvanic Isolator are the FieldMonitor* hazardous area solutions that support intrinsically safe transducer installations without external safety barriers. You must locate the FieldMonitor ITB and its associated modules in non-hazardous, Division 2, or Zone 2 areas while the connected transducers may be located in Division 1, Zone 1, or Zone 0 areas.
The 170190 Dual Galvanic Isolator installs directly into the ITB. This module eliminates the need to specify, install, and wire external safety barriers, or establish and maintain an intrinsically safe ground that zener safety barriers require. Two Galvanic Isolator versions are available:
 The 170190-01 is compatible with the 170133 and 170172 Internal Dual Proximitor* sensors. It also works with most of our standard Bently Nevada* external Proximitor sensors, velocity transducers, Velomitor* sensors, and accelerometers that use the 170180 transducer I/O modules.
 The 170190-02 was especially designed to be used with the CEC 4-131 and equivalent Velocity Transducers.
Note: An optional cable assembly (p/n 138925) is available when buffered dynamic outputs need to be routed to an external patch panel, or any other device requiring dynamic signals.

热卖型号:170190-01E 隔离器终端底座

ac -5595-008光钎焊反射开关ge d201466美卓RT节点PC AP31 D200137个性模块
IOP371分布式单元metso 85uvf1a – 1qd Fireye集成火焰扫描仪与内部火焰继电器
1326AB-B420E-21艾伦布拉德利伺服电机516tx 336A4940DNP516TX GE A微处理器器件
1394C-SJT10-A伺服控制器Allen bradley 516tx – 336a4940dnp516tx GE微控制器
GDlUNS0881V2印刷电路板abb 2mlr – cput霍尼韦尔CPUHT总线功能
33VM52-000-29 VM系列中的低惯量PMDC伺服电机PACIFIC scientific 177313-01-01 BENTLY NEVATA振动监测模块
KJ2231X1-EC1 4- 20ma系列2卡emerson pxie -6556 NI自动工业控制模块
85IRF1-1 Fireye集成火焰扫描仪与内部火焰继电器pfcl201ce ABB压力传感器控制器
3300 XL 8毫米接近传感器系统mtl BPHM64伊顿安全栅格底板
3300 XL 8毫米接近传感器系统1794- if4ixt艾伦布拉德利Flex I/O 1794系列输入模块
Bently内华达州990振动变送器1734- im4 Allen Bradley POINT I/O 4点数字输入模块
IS200TRLYS1BGG终端中继卡ge 1769-ECR艾伦布拉德利右端盖(ECR)模块一起使用
KJ2231X1-EA1 4- 20ma系列2卡emerson 136188-02 Bently Nevada以太网/RS232 Modbus I/O模块
接近探头Bently nevada ai02j ABB模拟输入模块
max4/11/03 /032/99/1/1/00伺服电机elau dssa165 ABB交流电源模块
近距离探头Bently nevada pxie -1073 NI PXI底盘
D201139L美卓RT节点PC AP31 D200137个性模块f860 – ca霍尼韦尔C系列“现场总线接口模块”
D201376美卓RT节点PC AP31 D200137个性模块dssa165 ABB交流电源模块
IS220PRTDH1A 336A4940CSP6 RTD (Resistance Temperature Device)输入模块ge 125840-02 Bently电源模块
IS220PSCAH1A 336A4940CSP9 Mark VI组件ge 125680-01 bent位移检测模块
IS220PDIAH1BE 336A5026ADP4电阻温度器件(RTD)输入模块ge 147663-01 BENTLY通信模拟输出模块
IS420ESWBH3AX GE模拟I/O模块125800-01 Bently Nevada关键相输入/输出模块
516TX 336A4940DNP516TX GE 516TX- a工业以太网交换机140471-01 Bently Nevada开发的带有内部终端的I/O模块

本篇文章出自厦门雄霸电子商务有限公司漳州分公司,转载请附上此链接: /

雄霸

热线电话 在线询价
提示

请选择您要拨打的电话: