产品简介
WingGateorganicallyintegratesmechanical
详细介绍
Wing Gate organically integrates mechanical, electronic, microprocessor control and various identification technologies to facilitate the use of IC card, ID card, barcode card, ID card, fingerprint, scenic spot ticket checking machine and other card reading and identification devices. Through the selection of various identification system equipment and the use of reliable security protection devices, alarm devices, direction indications, etc., the intelligent control and management of the channels are coordinated and implemented.
Wing gate is divided into: single movement and dual movement; single movement: for single channel and multi-channel; dual movement: for multi-channel
technical parameter
Shape material: The whole machine has no corners, the main body is made of 304 # stainless steel, and the overall plate thickness is more than 1.5mm
Main control circuit: A9 main control board based on linux embedded system, communication mode 485;
Control movement: All motor core mechanical transmission is based on bearing control / control circuit based on ARM technology. The gate can be programmed online, and the gate firmware can be upgraded to meet future needs.
Channel indication: LED channel indication; support live voice prompt function
Telescopic arm length: 275mm
Maximum channel width: 600mm
Weight: 60KG
Case material: domestic standard (No. 304) stainless steel
Wing door color: red, blue, transparent optional
Drive motor: Taiwan imported motor (24V)
Input interface: relay switch signal or 12V level signal or 12V pulse signal with pulse width> 100ms, drive current> 10mA
Infrared induction: 3-5 pairs of UV protection infrared
Normal service life: 3 million times
LED indicators: 4 (can be added as required)
Card reader window: 2 (can be added as required)
Passing speed: 50 people / minute (normally open), 25-30 people / minute (normally closed)
Gate opening and closing time: 1 second
Time required to enter the pass state after power on: 3 seconds
Automatic reset time after failure: 10 seconds
Main functions and features
With fault self-test and voice prompt function, it is convenient for users to maintain and use;
Through the built-in small dial and liquid crystal display on the main control board, the running state of the programmable device;
Mechanical structure, induction double anti-pinch function, when the telescopic arm encounters resistance during reset, it will automatically stop or the motor will stop working within the default time, and reset again after the default delay (until reset), and the force is very small (≤ 2Kg);
Sound and light alarm function: including illegal intrusion and trailing alarm;
With voice prompts and entry and exit times statistics;
Anti-shock function, the swing arm is automatically locked when no opening signal is received;
Telescopic arm synchronization function;
With automatic reset function, after opening the gate, the system will automatically cancel the user's access authority for the current passage within the specified time, the standard is automatically reset 5 seconds after opening;
After the power is cut off, the channel will be opened automatically, and the power will be closed automatically; the motor noise is small
Can be hooked up with a variety of card readers and receive relay switch signals to work;
Can realize remote control and management directly through the management computer;
Scalable functions
Counting function;
The chassis is lengthened and the material of the telescopic arm is selected.
Main structure and configuration
2 standard chassis
2 telescopic arms (color optional)
2 main control boards
1 set of power supply system
2 brushless motors
2 sets of movement and transmission part
3 infrared pairs
Wing gate working environment:
Indoor and outdoor (shade)
Temperature: -10 ℃ ——50 ℃
Relative humidity: ≤90%, no condensation
