3313A1 三轴加速度传感器-深圳市汉斯福特科技有限公司手机版

详细介绍

加速度传感器中有一种是三轴加速度传感器，同样的它是基于加速度的基本原理去实现工作的，加速度是个空间矢量，一方面，要准确了解物体的运动状态，必须测得其三个坐标轴上的分量；另一方面，在预先不知道物体运动方向的场合下，只有应用三轴加速度传感器来检测加速度信号。由于三轴加速度传感器也是基于重力原理的，因此用三轴加速度传感器可以实现双轴正负90度或双轴0-360度的倾角，通过校正后期精度要高于双轴加速度传感器大于测量角度为60度的情况。三轴加速度传感器的好处就是在预先不知道物体运动方向的场合下，只有应用三维加速度传感器来检测加速度信号。三维加速度传感器具有体积小和重量轻特点，可以测量空间加速度，能够全面准确反映物体的运动性质。

美国Dytran的3313A1是一款微型三轴加速度传感器/振动传感器，压电式工作原理，重量4.1g，频响范围1.2-10000Hz，高密封设计，应对高湿度和多尘工作环境。

The Dytran 3313A1 is a miniature triaxial IEPE accelerometer weighing just 4.1 grams and a vertical height of 0.47 inches (11.9 millimeters).

Available with a 1 mV/g sensitivity, the model 3313A1 features an industry standard 4-pin radial connector and 10-32 tapped hole. Design of the model 3313A1 incorporates quartz shear sensing elements, packaged in a laser welded titanium housing. Units have a frequency range of 1.2 to 10,000 Hz and are hermetically sealed for reliable operation in high humidity and dirty environments.

特性

1. 1 mV/g sensitivity

2. 5,000g range

3. 1.2 to 10,000 Hz frequency range (±15%)

4. 4-pin 1/4-28 radial connector

5. 10-32 tapped hole

6. 4.1 grams

7. Titanium

8. Hermetic

9. Broad frequency response

10. Triaxial

11. IEPE

应用

1. Environmental Stress Screening (ESS)

环境应力筛选

2. HALT/HASS

高加速寿命试验和应力筛选

3. Modal and structural analysis

模态和结构分析

4. Noise, Vibration and Harshness (NVH)

噪音，振动和不平顺性

5. General purpose triaxial vibration measurements

一般用途三轴振动测量

Weight, Max 0.14 oz 4.1 grams

Connector 1/4-28. 4 Pin 1/4-28. 4 Pin

Mounting Provision Tapped Hole 10-32 10-32

Material : Housing / Connector Titanium Titanium

Sensitivity, ±10% [1] 1 mV/g 0.10 mV/m/s2

Range ±5000 g

Frequency Response, ± 15% 1.2 to 10000 Hz 1.2 to 10000 Hz

Equivalent Natural Frequency > 30 kHz > 30 kHz

Equivalent Electrical Noise , Max 0.07 grms 0.69 m/s2 rms

Linearity [2] ± 1 % F.S. ± 1 % F.S.

Maximum Transverse sensitivity 5 % 5%

Maximum Vibration ± 7000 g's,peak ± 68670

Maximum Shock ±5000 g's,peak ±49050 m/s2, peak

Temperature Range -60 to +250 °F -51 to +121 °C

Seal Hermetic Hermetic

Base Strain 0.006 g/με 0.06 m/s2/µε

Electrical

Supply Current Range 2 to 20 mA 2 to 20 mA

Compliance (Supply) Voltage Range + 18 to +30 Volts + 18 to +30 Volts

Output Impedence,Typ 100 Ω 100 Ω

Bias Voltage +7 to +9 VDC +7 to +9 VDC

Discharge Time Constant 0.2 to 1.0 Sec 0.2 to 1.0 Sec

Ground Isolation Case Ground Case Ground

配件

Supplied Accessories: (1) model 6200 mounting stud (10-32 to 10-32)

Recommended Accessories: model 4114B1 current source power unit, model 6228 adhesive mounting base, model 6272 magnetic mounting base

Compatible Cables: 6811A, 6812A, 6824A, 6828A, 6873A, 6925A, 6933A, 6967A, 6997A

订货型号

3313A1

3313A2

3313A3

产品简介

详细介绍