品牌
其他厂商性质
广州市所在地
400G CFP2 DCO Optical Transceiver Module
面议100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver
面议100Gb/s QSFP28 DWDM PAM4 Dual LC Transceiver
面议100Gb/s QSFP28 DWDM Dual CS Adaptor Transceiver
面议100GBASE-SR Bi-Directional QSFP28 850/900nm 100m DOM LC MMF Optical Transceiver Module
面议100GBASE-LR Bi-Directional QSFP28 1280/1310nm 20km LC SM Optical Transceiver Module
面议100Gb QSFP28 ER4 40Km 1310nm LC Optical Transceiver
面议100G QSFP28 LR4 1310nm 10km LC Optical Transceiver
面议1X9 Optical Transceiver
面议3G Video SFP Optical Transceiver support 1080P 60HZ Video
面议3G Video CWDM SFP Optical Transceiver support 1080P 60HZ Video
面议12G Video SFP+ Optical Transceiver support 4K 60HZ Video
面议
RSFD-10GD-CXX Series
155M~10Gb/s 40km DWDM SFF Transceiver Module, Duplex LC, +3.3V,50GHz, DWDM EML, Single mode
FIBERWDM's RSFD-10GD40-Cxx is a surface mounted transceiver module, it supports 155-9.95 GBIT/s bit rate in the CDR off-line mode, and9.95-10.3125 GBIT/s bit rate in CDR mode.Suitable for40km SMF connection, and-40℃to 85℃ Working Industrial Temperature, it grate used in DWDM transfer mission system.
Diagrammatic Layout
Product Information
Type | Bite Rate | Wavelength of Laser(nm) | Transmission Range(km) | Fiber Type | Connector | Temperature |
1550 | 155M-10.3125G | 1550 | 40 | SMF | LC | -40~+85℃ |
DWDM | 155M-10.3125G | 50Ghz DWDM | 40 | SMF | LC | -40~+85℃ |
DWDM wavelength Guide, please check in datasheet, or contact us.
Absolute Maximum Ratings
Parameter | Simbol | Min | Typical | Max | Unit | Annotation |
Power Voltage | Vcc3 | -0.5 | - | +3.6 | V | 2 |
Temp of Storage | Ts | -40 | - | +85 | °C | 2 |
Humidity of Working | RH | 0 | - | +95 | % | 2 |
Note2:Exceeding any of these values can permanently destroy the device.
Recommended Working Environment
Parameter | Simbol | Min | Typical | Max | Unit | Annotation |
Working Temperature of Shell | TC | -40 | - | +85 | °C |
|
Working Voltage | Vcc | 3.14 | 3.3 | 3.47 | V |
|
Working Current | Icc | - | - | 600 | mA |
|
Working Rate Bit | BR | 155 | - | 10.3125 | Mbps |
|
Electrical Property
Simbol | Min | Typical | Max | Unit | Annotation | ||||
Transmitter | |||||||||
Differential Input Voltage Swing | Vin,P-P | 180 | - | 700 | mVPP |
| |||
Differential Input Impedance | ZIN | 80 | 100 | 120 | Ω |
| |||
Transmitting Fault | Running Normal | VOL | 0 | - | 0.8 | V |
| ||
Transmitter Fault | VOH | 2.4 | - | VCC+0.4 | V |
| |||
Transmitter OFF | Running Normal | VIL | 0 | - | 0.8 | V |
| ||
Laser OFF | VIH | 2.4 | - | VCC+0.3 | V |
| |||
Receiver | |||||||||
Differential data output swing | Vout | 400 | 600 | 850 | mV |
| |||
Differential Output Impedance | ZD | 80 | 100 | 120 | Ω |
| |||
Output Rising Time (20-80%) | TR | 25 | - | - | ps |
| |||
Output Falling Time (20-80%) | TF | 25 | - | - | ps |
| |||
Receiving Signal Detection | Running Normal | VOL | 0 | - | 0.4 | V |
| ||
Loss of Receiving signal | VoH | 2.4 | - | VCC | V |
|
Optical Property
Parameter | Simbol | Min | Min | Typical | Max | Annotation |
Optical Emission Characteristics | ||||||
Bit Rate | BR | 155 | - |
| Mbps |
|
| 10.3125 | Gbps |
| |||
Range of Central Wavelength | λc1 | - | 1550 | - | nm |
|
λc2 | 1529.16 | - | 1547.72 | nm |
| |
Transmit off optical power | Poff | - | - | -30 | dBm |
|
Average Optical Power | P0 | -3 | - | 2 | dBm | 1 |
Extinction Ratio | ER | 8.2 | - | - | dB |
|
Side Mode Suppression Ratio | ∆λ | 30 |
|
| nm |
|
Optical Receiving Characteristics | ||||||
Bit Rate | BR | 155 | - |
| Mbps |
|
| 10.3125 | Gbps |
| |||
Receive Sensitivity | Pmin | - | - |
-16
| dBm | 2 |
Receiving overload sensitivity | Pmax | 2 | - | - | dBm | 2 |
Range of Receiving Wavelength | λc1 | - | 1550 | - | nm |
|
λc2 | 1529.16 | - | 1547.72 | nm |
| |
Received signal detection judgment | LOSD | - | - | -27 | dBm |
|
Received Signal Loss Judgment | LOSA | -40 | - | - | dBm |
|
Signal detection lag | LOSH | 0.5 | - | 6 | dB |
|
Note:
1. Fiber is 9/125 Single Mode
2. Test Condition is Code Pattern:PRBS 231-1,Test Rate:10.3125Gbps,BER=10E-12
Definiation of PINS
Recommended Interface Circuit
Structure Diagram
1.LC duplex connector
P4, LC duplex connector
2.Customizable pigtail fiber(the pigtail fiber length is 0.9mm to 1m)
P5, Customizable pigtail fiber
P6,Mechanical Principle Diagram