Elcometer 品牌
代理商厂商性质
深圳市所在地
狄夫斯高DeFelsko AT-M拉脱法附着力测试仪|
面议德国菲希尔FISCHER【MP0型手持式袖珍涂层测厚仪】
面议
QFH划格仪│百格刀|涂层表面机械性能
面议
600E│爱尔兰Suparule│600E超声波线缆测高仪
面议
2000E│澳洲NEW│2000E超声波线缆测高仪
面议
6000E│澳洲NEW│6000E超声波线缆测高仪
面议
CHM6000│瑞士LECOM│CHM6000线缆测高仪
面议[DeFelsko UTG型壁厚测厚仪]美国狄夫斯高DeFelsko
面议[DeFelsko 200型超声波涂层测厚仪]美国狄夫斯高DeFelsko
面议[DeFelsko DFT型涂层测厚仪]狄夫斯高DeFelsko
面议美国狄夫斯高DeFelsko│Positest AT/AT-A型拉脱法附着力测试仪
面议[DeFelsk 6000型金属基材涂层测厚仪]狄夫斯高DeFelsko│
面议如有任何问题请与我司业务专员：
：豪
:fuhao@17Lp.com
英国易高Elcometer 115湿膜梳
这些精密不锈钢湿膜梳可重复使用，经久耐用.
Elcometer 115 湿膜梳有公制或者英制可选，厚度范围zui高可达1270μm 或 50mils。精确度为5% 或 2.5μm （0.01mil），取更大者。
每个湿膜梳有10个测量数值（阶齿）
使用湿膜梳
将湿膜梳垂直放置，接触到基体。保持原地等待几秒钟，直到梳齿变湿。拿开湿膜梳.
湿膜厚度在"含漆"或"湿"齿zui大值和"不含漆"或"干"齿zui小值之间
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.
Wet film combs have teeth of various lengths on their sides.
Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.
The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value Example In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou. If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement. To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe. On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
| 符合以下标准 | |
| AS/NZS 1580.107.3 | ASTM D 4414-A |
| BS 3900-C5-7B | ISO 2808-1A |
| ISO 2808-7B | NF T30-125 |
| US Navy NSI 009-32 | US Navy PPI 63101-000 |
Elcometer 115湿膜梳
| 范围 | 阶差 | 部件编号 |
| 1 - 13mils | 1, 1.5, 2, 3, 4, 5, 7, 9, 11, 13mils | B11529451E |
| 20 - 325μm | 20, 35, 50, 75, 100, 125, 175, 225, 275, 225, 275, 325μm | B11529455M |
| 2 - 18mils （51 - 457μm） | 2, 3, 4, 6, 8 10, 12, 14, 16, 18mils （51, 76, 102, 152, 203, 254, 305, 356, 406, 457μm） | B11529452 |
| 2 - 30mils （51 - 762μm） | 2, 4, 6, 8, 10, 10, 15, 20, 25, 30mils （51, 102, 152, 203, 254, 254, 381, 508, 635, 762μm） | B11529453 |
| 5 - 50mils （127 - 1270μm） | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50mils （127, 254, 381, 508, 635, 762, 889, 1016, 1143, 1270μm） | B11529454 |
How to use a Wet film Comb - Elcometer Wet Film Measurement
