品牌
代理商厂商性质
深圳市所在地
横河ADM15R继电器输入模块
ADM15R 继电器输入模块(16 点,端子型)
ADM55R-1
ADM55R-2 继电器输出模块(16 点,端子型)
Relay I/O Modules
These modules receive or output digital signals from/to the field through relays. They have 16 relay points.
Item | Specifications |
Model | ADM15R |
Input rating | 24 V DC 8.3 mA±10 % Induction load (*1) |
Input format | Non-voltage contact (between terminals A-B) Terminal B is common with system common. |
Relay operation time | 10 ms or less (*2) |
Relay return time | 10 ms or less (*2) |
Current consumption | 2 A or less (5.0 V DC) |
How installed | Installed in the relay I/O module nest. |
How connected | Connected to the terminal of the relay I/O module nest with M4 screws. |
*1: 24 V DC is supplied from the built-in power supply.
*2: Operation and return time of the relay; must add communication process time between supervisory computer and module.
Item | Specifications |
Model | ADM55R |
Suffix codes | -1: Reset action during on-line maintenance -2: Hold action during on-line maintenance (*2) |
Output rating | 250 V AC 1.5 A or less 125 V DC 0.1 A or less 24 V DC 1.5 A or less |
Output format | A contact between terminals AC B contact between terminals BC |
Relay operation time | 10 ms or less (*1) |
Relay return time | 10 ms or less (*1) |
Current consumption | 2 A or less (5.0 V DC) |
How installed | Installed in the relay I/O module nest. |
How connected | Connected to the terminal of the relay I/O module nest with M4 screws. |
*1: Operation and return time of the relay; must add communication process time between supervisory computer and module.
*2: Output hold action of ADM55R-2 is effective in status output mode.
DCS培训资料:
*安装VL网络驱动程序时
当计算机上没有安装任何网络情况下,*安装VL网络驱动程序的过程如下:
1. 启动Windows NT,登陆到管理员账户
2. 把CS1000安装盘放入光驱
3. 打开控制面板,双击“network”,出现网络配置对话框:
4. 点击“是”,开始网络安装向导
5. 选择“connection to network”(连接到网络),点击“Next”
6. 点击“Select from list”(从列表中选择),点击对话框中的“Disk used”,出现“insert disk”(插入磁盘)对话框。键入欲安装VL网卡驱动程序的路径,点击“OK”
如:D:\CS1000\Vlnet\NIC
驱动安装程序启动,出现“OEM option selection”(选择OEM)对话框
7. 选择“YOKOGAWA VLnet Adapter”,点击“OK”
8. 确认“YOKOGAWA VLnet Adapter”显示于对话框中,点击“Next”
9. 点击“Select from list”(从列表中选择),点击对话框中的“Disk used”,出现“insert disk”(插入磁盘)对话框。键入欲安装VL网络协议驱动程序的路径,点击“OK”
如:D:\CS1000\Vlnet\TDC
出现“OEM option selection”(选择OEM)对话框
10. 选择“YOKOGAWA VLnet Protocol”,点击“OK”,拷贝完毕,在协议对话框中“YOKOGAWA VLnet Protocol”变为“Network Protocol”
11. 点击“Next”出现另一个对话框,再点击“Next”,出现Windows NT安装对话框