Product advantages
1. The front is made of glass, with P-shaped backlight, atmospheric appearance, and more sense of technology; at the same time, it is matched with golden arc edges to make the product more luxurious;
2. Highly integrated, integrated license plate recognition unit and barrier unit, get it in one machine, save installation position and improve installation efficiency;
3. Intelligent fill light control system, the fill light is controlled by software, using time control switch, the brightness of fill light can be set to change with time;
4. With 3 / 6S double speed gate movement, the speed of landing and landing can be selected by dialing code. The speed of landing and landing can be different. For example: starting 3S and landing 6S;
5. The barrier has the function of returning when encountering obstacles, which can avoid the situation of smashing cars and people;
6. The barrier comes with a ground-sensing module, which is highly integrated and does not require additional ground-sensing, saving costs;
7. The barrier movement adopts high-quality technology, which does not shake the rod, does not heat protect, and does not get stuck.
Features
1. Clutch on the swing lever shaft, manually start the lever quickly after power failure, and automatically reset when the phone calls.
2. Full digital limit, precise control, eliminating manual limit adjustment.
3. Select the starting and falling speeds by dialing the code, one model can choose two speeds, and the starting and falling speeds can be different.
4. Comes with the return function of the brake lever in case of resistance.
5. Infrared anti-smashing (need to match the shooting device).
6. The external grounding sense can realize anti-smashing car and automatic rod dropping function after the car passes.
7. Integrated RS485 serial communication, which can realize computer control of starting, falling and stopping.
8. Flashing traffic light interface.
9. Equipped with counting function, it can memorize the number of starting pole signals, the vehicle will automatically deduct the deduction after passing the ground pressure, and then drop the pole after the memory vehicle passes, to improve the traffic efficiency.
10. Self-delayed automatic pole drop function, combined with counting function, if the vehicle passes the number of times less than the starting pole memory, it can count down and close the gate automatically. If there is a pole start signal or ground sense signal, the countdown will be counted down again.
11. Intelligent fill light system, the brightness of the fill light can be controlled by software, and the fill light can be turned on and off during the time period.
Machine specifications
Operating Voltage
AC220V ± 10% 50Hz
Operating temperature
-25 ℃ ~ + 70 ℃
Relative humidity
≤95%, no condensation (at room temperature)
rated power
400W
communication method
TCP communication
LED display
2 lines display, custom display content
Insulation class
F
Remote distance
≧ 30 meters
Relative humidity
≦ 90%
Enclosure rating
IP64
Chassis material
1.5mm thick high-strength steel plate, 5mm tempered glass
Chassis technology
Sheet metal mold forming, spray color gray with gold
Dimensions
380 * 335 * 1300mm (length * width * height)
Camera specifications
processor
TIDM8127
sensor type
2 million star levels
Minimum illumination
Color 0.1Lux
Video compression format
JPEG
Resolution
1920 * 1080
Recognition angle
≤45 °
Vehicle capture rate
≥99%
License plate recognition rate
≥99%
License plate recognition image
JPEG (1920 * 1080)
Fill light specifications
Number of lamp beads
9 bright LED lights
power
9W
On / off control
Software control settings
Fill distance
The illumination at 5m is greater than 50LUX
Adjust the angle
Three-dimensional universal adjustable, adjustable range 20 degrees