▲Frame housing: the use of 1.2mm cold rolled steel sheet. The metal frame inside and outside layer with epoxy resin cured

   at high temperature electrostatic spraying, divided into two parts.

▲ Taiwan panel: 12.7mm thick core physical and chemical board (domestic).

▲ Lining board and guide board: using solid core compact panel, around the air suction structure, which can make the air of

   different proportion of the absorbed. The guide plate is connected with a special fixed connecting piece, and the cleaning and

   maintenance are convenient for loading and unloading. At the same time, the special fixed connecting piece can also be

   convenient to install and remove the grid.

▲ Mobile sliding door: special door frame material and door frame handle, with aluminum alloy connecting piece, the door open

   height of 800mm can freely lift, and no stop.

▲ Circuit: key control switch group, the configuration of four 250V10A transparent anti splash multi function socket, lighting with

   a protective cover fluorescent lamp.

▲ Water: a water valve, copper porcelain fluid cork, PP material cup.

▲ Gas path: set aside installation holes, can be added to the demａnd by up to seven sets of gas path.

▲ Anti corrosion glass fiber reinforced plastic fan, can be built in external.

C. Controller introduction

Display our Logo     Colorful LCD Display           

Can also be customized to display your Logo       

Timed working and closing

Convenient operation

Fan delay off   Factory mode

Discharge poisonous gas