品牌
生产厂家厂商性质
所在地
上海欣谕实验室2平方中试型冻干机XY-FD-S20科研用真空冷冻干燥机
面议欣谕中试压盖型冻干机实验室XY-FD-S10压盖冷冻干燥机
面议上海欣谕中试冻干机1平方冷冻干燥机实验室XY-FD-S10真空冷冻干燥机
面议欣谕10公斤冻干机XY-FD-L10D冷冻干燥机1平方电加热真空冷冻干燥机
面议上海欣谕0.4平方实验室冻干机XY-FD-L4D普通型真空冷冻干燥机
面议上海欣谕小型冻干机XY-FD-L2真空冷冻干燥机0.2平方实验室科研冻干机
面议欣谕小型冷冻干燥机0.1平方智能控温XY-FD-L1冻干机
面议欣谕-120度有机溶液冻干机,甲醇,乙醇冷冻干燥机设备
面议欣谕XY-FD-S5F定制款0.5平方-120度冷井冻干仪器设备
面议欣谕XY-FD-1SL冻干机、原位预冻卧式冷冻干燥机
面议XY-FD-27(压盖型)欣谕冷冻干燥机、0.3实验型冻干机
面议欣谕XY-FD-1压盖型冻干机,实验型冷冻干燥机
面议欣谕XY-FD-S2E水冷压盖药机冻干设备 技 术 配 置
附件一
XY-SGY-2.1General Detail总述 | ||||
SrNo. | Description描述 | Specifications规格 | ||
1 | Mode 型号 | XY-SGY-2.1 | ||
2 | Output (approx.) 产量(大约) | 6,600 units of vials 16mm diameter 外径16毫米冻干瓶9,000瓶 | ||
3,200units of vials 22mm diameter 外径22毫米冻干瓶4,500瓶 | ||||
3 | Maximum ice capacity Z大捕冰力 | 50kg | ||
4 | Dimension of unit (approx.) (L × W × H) (mm) 外型尺寸(大约)(长×宽×高)) | 4,500 × 1,800 × 3300(液装置可现场拆装) (Final dimension based on design) (以Z终设计尺寸为准,可根据客户要求调节尺寸) | ||
5 | Weight (approx.) 重量(大约) | 3,500kg | ||
Chamber 冻干箱 | ||||
1 | Chamber type 冻干箱外型 | Rectangular 长方体 | ||
2 | Sloping 箱体倾斜度 | 1% | ||
3 | Finish 内部抛光度 | Ra≤0.4um (0.4Mircon) | ||
4 | Corner 箱内角 | Coping 圆弧角 | ||
5 | Validation port 验证孔 | Included 有(1个)位置箱体顶部 | ||
6 | Viewing port 视镜 | Illuminated 带远射灯【LED广角】 | ||
Number 数量 | 1 | |||
Location 位置 | Side 侧面 | |||
Dimension 尺寸 | DN150 (mm) | |||
Material 材质 | ||||
Internal 内部 | AISI 316 | |||
Insulation 保温 | Alu polyisocyanurate foam 聚氨酯材料 | |||
External cover 外部 | 304 | |||
Door 箱门 | ||||
1 | Finish 抛光度 | Ra≤0.4um (0.4Mircon) | ||
2 | Viewing port 视镜 | Included 有 | ||
Number 数量 | 1 | |||
3 | Open direction 开门方向 | Right (face to door, hinge on left side) 右开(面对箱门,铰链在右) | ||
4 | Open angle 开门角度 | More than 110o 大于110度 | ||
5 | Gasket 密封圈 | O-shaped silicone rubber single gasket O-型硅橡胶单密封 | ||
6 | Locking arrangement 门锁方式 | Manual handle 手动方式 | ||
7 | Material 材质 | |||
Internal 内部 | AISI316 | |||
Shelves 板层 (带西林瓶防护条) | ||||
1 | Temperature range 温度范围 | -55°C to + 80°C | ||
2 | Temperature sensors (shelves) 板层温度探头 | 2 | ||
Silicone oil inlet 导热油进口 | ||||
Silicone oil outlet 导热油出口 | ||||
3 | Product sensors 产品温度探头 | 3 | ||
4 | Number of shelves 板层数 | 7+ 1(upper radiant shelf) (温度补偿板) | ||
5 | Dimension (L × W × T) (mm) 板层尺寸 | 600 × 500 × 16 | ||
6 | Total usable area (sq. m) 总使用面积 | 2.1 | ||
7 | Spacing (mm) 板间距 | 80mm | ||
8 | Hose of flexible connection 软管连接 | Welding 焊接 | ||
9 | Finish 抛光度 | Ra≤0.4um (0.4Micron) | ||
10 | Level 平整度 | ≤±0.5mm/m | ||
11 | Material 材质 | AISI 316 | ||
Condenser 冷凝器 | ||||
1 | Condenser type 冷凝器外型 | Rectangular 长方形 | ||
2 | Viewing port 视镜 | Illuminated 带远射灯【LED广角】 | ||
Number 数量 | 1 | |||
Location 位置 | Easily observe the whole inside condenser 容易观察到整个箱体内部 | |||
Dimension 尺寸 | DN150 (mm) | |||
3 | Final temperature J限温度 | ≤-75°C可定制-85度 | ||
4 | Cooling time (+20 to -40°C) 制冷速度(空载) | ≤30 minutes (empty) | ||
5 | Sloping 倾斜度 | 1% | ||
6 | Finish 抛光度 | Ra≤0.5um (0.5Mircon) | ||
7 | Corner 箱内角 | Coping 圆弧角 | ||
8 | Coiled pipe welding 盘管焊接 | Orbitally welded 自动焊接 | ||
9 | Isolation valve 中隔阀 | |||
Brand 品牌 | Valbia | |||
Type 外型 | 蝶阀 | |||
Size 尺寸 | DN150(mm) | |||
Actuator 制动 | 电动 | |||
12 | Coiled pipe material 盘管材质 | AISI 316 | ||
13 | Material 材质 | |||
Internal 内部 | AISI 316 | |||
Insulation 保温 | polyisocyanurate foam 聚氨酯材料 | |||
External cover 外部 | 316 | |||
Shelf Heating / Cooling 板层升温/降温 | ||||
1 | Circulation pump 循环泵 | |||
Brand 品牌 | 格莱富(美G) | |||
Model 型号 | UPS-32-80 | |||
Type 形式 | Double-motor canned type one standby 屏蔽式 | |||
Number 数量 | 1 | |||
Motor power 电机功率 | 0.35kW | |||
2 | Plate heat exchanger 板式热交换器 | |||
Brand 品牌 | Alfa Laval | |||
Model 型号 |
AC70-40EQ | |||
Type 方式 | Sealed brazed stainless steel 不锈钢封蜂窝式 | |||
Number数量 | 1 | |||
3 | Heater 电加热 | PID control PID 控制 | ||
4 | Maximum heating power Z大加热功率 | 3.0kW | ||
5 | Thermal fluid 导热介质 | Silicone oil 5 cst 粘度5 cst硅油 | ||
6 | Shelf cooling time (+25°C to -40°C) 板层制冷速度(空载) | ≤60 minutes (empty) | ||
7 | Heating rate 加热速度(大约) | 1°C/min (approx.) | ||
8 | Shelves temperature uniformity 板层温度均匀性(空载平衡后) | ≤±1°C (soak stage) | ||
9 | Compressor 压缩机 | |||
Brand 品牌 | Bitzer 比泽尔 | |||
Model 型号 | S4N-12.2Y | |||
Type 方式 | Two-stage 单机双级活塞式 | |||
Number 数量 | 1台 | |||
Motor power 电机功率 | 9kW (×1) | |||
10 | Refrigerant 制冷剂 | CFC-free R404A | ||
11 | Main refrigerating unit 主要制冷元件 | |||
Thermostatic expansion valve 热力膨胀阀 | Danfoss | |||
Solenoid valve 电磁阀 | Danfoss | |||
Sight glass 视液镜 | Danfoss | |||
Water cooling condenser 水冷凝器 | TEYI | |||
Oil separator 油分离器 | ALCO | |||
Accumulator 汽液分离器 | HONGGUO | |||
Liquid filter core 液体过滤芯 |
ALCO | |||
Liquid filter cartridge 液体过滤筒 | HONGGUO | |||
Gas filter core 气体过滤芯 | ALCO | |||
Gas filter cartridge 气体过滤筒 | HONGUO | |||
Pressure meter 压力表 | Refco | |||
Pressure controller 压力控制器 | Danfoss | |||
Vibration absorber 避震管 | PACKLESS | |||
Vacuum System 真空系统 | ||||
1 | Final vacuum J限真空 | ≤1×10 -2mbar | ||
2 | Evacuation time 抽气速度 | ≤30minutes (1×103 mbar to 1×10-1 mbar) | ||
3 | Leakage rate 泄露率 | ≤3×10-2 mbar•lit/sec | ||
4 | Oil pump 油泵 | |||
Brand 品牌 | BOASI | |||
Model 型号 | BSV60 | |||
Type 方式 | DRY-rotary 真空泵 | |||
Number 数量 | 1 | |||
Flow rate 排气速度 | 60m3/hr (×1) | |||
Motor power 电机功率 | 2.2Kw (×1) | |||
5 | Pump isolation valve 泵阀隔离阀 | |||
Brand 品牌 | Valbia | |||
Type 方式 | Butterfly 球阀 | |||
Number 数量 | 1 | |||
Size 尺寸 | DN 40 (mm) | |||
Actuator 制动 | 电动 | |||
6 | Anti-suction valve 真空防倒吸阀 | Included 有 | ||
De-icing 化霜 | ||||
5 | cleaning water outlet valves 化霜水出口阀 | |||
Brand 品牌 | Valbia | |||
Type 方式 | Ball 球型 | |||
Control System 控制系统 | ||||
1 | Software 软件 | XY– 5000 | ||
Automatic 自动 | Included 有 | |||
Manual 手动 | Included 有 | |||
2 | PLC+PC 可编程控制器 | Omron | ||
3 | Computer 电脑 | Lenovo | ||
5 | Vacuum gauge 真空探头 | Edwards | ||
6 | Temperature probe 温度探头 | Pt100 | ||
8 | Breaker 空开 | schneider | ||
9 | Contactor 接触器 | schneider | ||
10 | Relay 继电器 | schneider | ||
Safety System 安全系统 | ||||
1 | Vacuum failure protection 真空失败保护 | Included 有 | ||
2 | Temperature failure protection 温度失败保护 | Included 有 | ||
3 | Compressor protection 压缩机保护 | Included 有 | ||
4 | Other motors protection 其它电机保护 | Included 有 | ||
6 | Interlock protection 连锁保护 | Included 有 | ||
Utility Requirement (approx.) 共用工程消耗(大约) | ||||
1 | Electricity - total electrical load 总装机功率 | 22kW (380V, 50Hz, 3Phase, 5Wire) | ||
2 | Cooling water for refrigerant cooling 用于制冷系统的冷却水 | 8m3/hr (1.5≤P≤2bar, T≤25°C) |
以上为客户案列款2平方药机冻干设备,如有其他增项选配功能可以联系欣谕厂家电话
欣谕CIP/SIP医药冻干机 | ~宋先生 | |||||||||||||
型号 | XY-GY-0.5E | XY-GY-1E | XY-GY-2E | XY-GY-3E | XY-GY-5E | XY-GY-8E | XY-GY-10E | XY-GY-15E | XY-GY-20E | XY-GY-25E | XY-GY-30E | XY-GY-35E | XY-GY-40E | |
隔板面积 | M2 | 0.5 | 1 | 2 | 3 | 5 | 8 | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
装瓶数 | 个/Φ16MM | 1900 | 3900 | 10000 | 15000 | 21000 | 36000 | 46400 | 60000 | 83000 | 100000 | 120000 | 153600 | 168000 |
个/Φ22MM | 1000 | 2000 | 5000 | 7500 | 10500 | 18000 | 23700 | 30500 | 42000 | 49500 | 60000 | 70500 | 82000 | |
散装溶液量 | L | 10 | 20 | 40 | 65 | 100 | 160 | 220 | 300 | 400 | 500 | 600 | 600 | 850 |
隔板尺寸 | 宽(MM) | 300 | 450 | 600 | 600 | 900 | 900 | 915 | 1200 | 1200 | 1495 | 1495 | 1515 | 1495 |
深(MM) | 450 | 600 | 900 | 900 | 1200 | 1200 | 1215 | 1200 | 1495 | 1500 | 1800 | 1830 | 2000 | |
隔板数量 | 个 | 4+1 | 4+1 | 4+1 | 6+1 | 5+1 | 8+1 | 9+1 | 10+1 | 11+1 | 11+1 | 11+1 | 13+1 | 14+1 |
隔板间距 | MM | 100 | ||||||||||||
隔板温度范围 | ℃ | -55~+80℃ | ||||||||||||
冷凝器温度 | ℃ | -75 | ||||||||||||
冷凝器Z大捕水量 | KG | 10 | 20 | 40 | 65 | 100 | 160 | 220 | 300 | 400 | 500 | 600 | 750 | 850 |
PLC | OMRON | |||||||||||||
J限真空 | Pa | 1 | ||||||||||||
系统泄露率 | PA.m³/S | 0.025 | ||||||||||||
装机功率(KW) | 9 | 15 | 28 | 30 | 36 | 46 | 72 | 72 | 101 | 120 | 139 | 212 | 205 | |
长 | mm | 1650 | 2100 | 4500 | 4500 | 5300 | 5500 | 5800 | 5600 | 7500 | 7700 | 8000 | 6600 | 9000 |
宽 | mm | 1200 | 1200 | 1800 | 1800 | 2000 | 2050 | 2500 | 2200 | 2350 | 2720 | 2720 | 2700 | 3000 |
高 | mm | 1900 | 2500 | 3300 | 3300 | 3050 | 3200 | 3400 | 3700 | 4200 | 4300 | 4300 | 4800 | 4600 |
设备重量 | KG | 900 | 1200 | 3500 | 5500 | 6000 | 8000 | 9000 | 11500 | 16000 | 195000 | 22000 | 34000 | 26000 |
*以上数据仅供参考,可根据用户要求定制,Z终数据以合同为准。
1.可选CIP和SIP功能;
2.通常的标配为手动和自动双系统;
3.可根据用户厂房设计冻干机;
4.可根据用户要求选择技术配置;
5.可根据用户要求选择螺杆式压缩机;活塞式压缩机品牌:德G比泽尔;螺杆式压缩机品牌:日本前川、意大利来福康
6.可根据用户要求选择真空泵组形式;真空泵品牌:德G莱宝、英G爱德华、日本爱发科