HTS单座调节阀-上海金流茂业流体科技有限公司手机版

详细介绍

CV3000 系列

CV3000 SERIES

HTS 顶部导向单座调节阀 Top-guided Single Seated Control Valve

HTS 单座调节阀阀芯采用上导结构，阀体结构紧凑，流体通道呈 S 型，具有压降损失小，流量大，可调范围广，流量特性精度高，符合 IEC534-2-1976 标准。调节阀泄漏量符合 ANSI B16.104 标准。调节阀配用气动薄膜式或活塞式执行机构，也可使用电动执行器机构，其结构紧凑，调节性能*。

HTS 型调节阀更适用于要求调节性能高、泄漏率小的工况，可在高温、低温及低压差场合广泛使用。

产品符合 GB/T4213-2008 标准

HTS Single seated Control Valve with a top-guided valve plug, a compact valve body and an S-shape flow passage which features low pressure loss, large flow capacity, wide rangeability and high accuracy flow characteristics. The design complies with the IEC534-2-1976 standards and the leakage complies with the ANSI B16.104 standards. The control valve is equipped with pneumatic membrane or piston actuator, and the electric actuator mechanism can also be used. Its structure is compact and its regulating performance is superior.

The HTS control valve is more suitable for high performance and low leakage rate. It can be widely used in high temperature, low temperature and low differential pressure .

This product complies with the GB/T4213-2008 standards.

标准规格 STANDARD SPECIFICATION

阀体 BODY

形式 Type

直通单座铸造球型阀 Straight-through, single seated, cast globe valve

公称通径

Normal size

32、40、50、65、80、100、125、150、200、250、300mm

公称压力

Pressure rating

PN 1.6~ 1.0 MPa ；ANSI Class 125~900；JIS 10K~40K; *

连接型式

End connections

法兰型 Flanged：FF、RF、RJ、TG、MFM

焊接型 Welded end： SW（40～50mm）；BW（65～250mm）

尺寸 Dimensions

请参见表 5 See Table 5

阀体及上阀盖材质

Body & Bonnet Material

SCPH2/WCB,SCPH21/WC6,SCS13A/CF8,SCS14A/CF8M,SCS16A/CF3M,Ti

ａnd other alloy steels.

各种材质的使用温度• 压力范围，请参见表 1 和表 2

As to the operating pressure-temperature limitation for each material, see Table 1& 2

上阀盖型式 Bonnet type

常温型（P） Plain type ：－17～＋200℃

伸长 I 型（EI）Extension Type I：－45～－17℃ and ＋200～＋566℃ 伸长 II 型（EII）Extension Type II：－100～－45℃

压盖型式 Gland type

螺拴压紧式 Bolted gland

填料

Packing

V 型聚四氟乙烯填料、石墨填料请参见图 2 Teflon V-ring, Graphite，etc. See Fig.2.

垫片

Gasket

锯齿型（SUS316、SUS316L）

Saw-tooth type （Stainless steel）

表面涂层

Surface coating

灰色（聚氨酯、环氧树脂）。但是阀体材质为不锈钢时，本体部不加涂层。

Gray (polyurethane, epoxy) is standard. In the case of stainless steel body, no painting is standard.

* 法兰标准 Standard: JIS B2201-1984、JB/T79.1-94(PN1.6MPa);JB/T79.2-94(PN4.0、6.4MPa);

ANSI B16.5-2009;HG20592-2009、HG20615-2009

产品简介

详细介绍