CGEP72TP3-millipore滤芯CGEP72TP3-上海殷达科学仪器有限公司手机版

详细介绍

millipore滤芯CGEP72TP3

Millipore Express® SHF Cartridge Filter 20 in. 0.2 µm Code 7 Silicone

概述
Replacement Information
规格
Description
Catalogue Number CGEP72TP3
Trade Name
Millipore Express®
Description Millipore Express® SHF Cartridge Filter 20in. 0.2µm Code 7 Silicone
References

Product Information
Device Configuration Cartridge
Maximum Inlet Pressure, bar (psi) Forward- 7 bar (100 psi) @ 25°C; 1.7 bar (25 psi) @ 80°C; 0.35 bar (5 psi) @ 135°C; Reverse- 2.07 bar (30 psi) @ 25°C; 0.07 bar (1 psi) @ 135°C
Cartridge Code Code7
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Applications

Biological Information
Bacterial Endotoxins Aqueous extraction contains ≤0.25EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media Millipore Express® SHF
Sterilization 25 forward or 22 forward and 3 reverse SIP cycles of 30min @ 135°C; 25 autoclave cycles of 60min @ 126°C
Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷CFU/cm² using ASTM®F838 methodology.
Wettability Hydrophilic

Physicochemical Information
Pore Size 0.2 µm
Air Diffusion at 23°C ≤60mL/min @ 2.75bar (40psig) in water
Bubble Point at 23°C ≥4000mbar (58psig) air with water
Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21CFR177-182.
Maximum Differential Pressure Forward: 6900 mbar (100 psi) @ 25°C; 1700 bar (25 psi) @ 80°C; 340 mbar (5 psi) @ 135°C. Reverse: 2100 mbar (30 psi) @ 25°C, 69 mbar (1 psi) @ 135°C
Non-Fiber Releasing This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).
TOC/Conductivity After sterilization and a controlled water flush of 20L, samples exhibited less than 500ppb TOC per USP <643> and less than 1.3µS/cm per USP <645> at 25°C.
USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length 20 in. (50 cm)
Diameter 6.9 cm (2.7 in.)
Filtration Area 1.1 m²
Device Size 20 in.
Materials Information
Chemistry
Polyethersulfone (PES)
Device Material
Polypropylene/Polysulfone
Seal Material Silicone (SI)
Support Material Polypropylene

Packaging Information
Material Size 3
Material Package Double Easy-Open bag

Description
Catalogue Number	CGEP72TP3
Trade Name	Millipore Express®
Description	Millipore Express® SHF Cartridge Filter 20in. 0.2µm Code 7 Silicone

Product Information
Device Configuration	Cartridge
Maximum Inlet Pressure, bar (psi)	Forward- 7 bar (100 psi) @ 25°C; 1.7 bar (25 psi) @ 80°C; 0.35 bar (5 psi) @ 135°C; Reverse- 2.07 bar (30 psi) @ 25°C; 0.07 bar (1 psi) @ 135°C
Cartridge Code	Code7
Good Manufacturing Practices	These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Biological Information
Bacterial Endotoxins	Aqueous extraction contains ≤0.25EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media	Millipore Express® SHF
Sterilization	25 forward or 22 forward and 3 reverse SIP cycles of 30min @ 135°C; 25 autoclave cycles of 60min @ 126°C
Bacterial Retention	Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷CFU/cm² using ASTM®F838 methodology.
Wettability	Hydrophilic

Physicochemical Information
Pore Size	0.2 µm
Air Diffusion at 23°C	≤60mL/min @ 2.75bar (40psig) in water
Bubble Point at 23°C	≥4000mbar (58psig) air with water
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21CFR177-182.
Maximum Differential Pressure	Forward: 6900 mbar (100 psi) @ 25°C; 1700 bar (25 psi) @ 80°C; 340 mbar (5 psi) @ 135°C. Reverse: 2100 mbar (30 psi) @ 25°C, 69 mbar (1 psi) @ 135°C
Non-Fiber Releasing	This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).
TOC/Conductivity	After sterilization and a controlled water flush of 20L, samples exhibited less than 500ppb TOC per USP <643> and less than 1.3µS/cm per USP <645> at 25°C.
USP Bacterial Endotoxins	A sample aqueous extraction contains less than 0.25EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.

Dimensions
Cartridge Nominal Length	20 in. (50 cm)
Diameter	6.9 cm (2.7 in.)
Filtration Area	1.1 m²
Device Size	20 in.

Materials Information
Chemistry	Polyethersulfone (PES)
Device Material	Polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polypropylene

产品简介

详细介绍

规格