BT2880-231WSA

台式针阀

类别:颜色技术，针形阀

应用:所有实验室气体的流量调节，包括特殊气体，如氮气、氧气、氦气和Q气。订购时，阀门可能经过专门清洁、润滑和包装，用于纯气体应用。CSA国际认证的阀门可用于T然气服务。

饰面:标准配置白色粉末涂层饰面。其他颜色和饰面可供选择(见下文)。

安装:带单出口和可拆卸定位销的转台底座。

阀体:直纹锻造黄铜。

头饰:浮动不锈钢针和可更换不锈钢座。

手柄:带索引盘的模制尼龙带帽手柄。根据欧洲标准13792，手柄和索引用颜色编码和标记。

入口:配有安装柄、锁紧螺母和垫圈。

出口:G3/8母出口，带可拆卸锯齿状软管端。

质量保证:配件在装运前经过组装和工厂测试。17巴(250磅/平方英寸)氮气试验压力，10巴(150磅/平方英寸)Z大工作压力。
可选功能

完成选项:

灰色粉末涂层饰面(GRY)

抛光镀铬表面，透明环氧涂层

缎面镀铬表面，透明环氧涂层

光滑镀镍表面，透明环氧涂层(SNC)

流量停止/过滤器选项:

安装在转台底座上的流量停止容积控制和切断阀(使用前缀“BTFS”)可拆卸过滤器，用于去除介质流中的碎屑和杂质(使用前缀“BTFL”)

阀门选项:

防止回流的整体止回阀(添加后缀“CV”)

插座选项:

将锯齿形软管端代替直软管端(订单BT2882)

代替软管端的快速连接配件(订单BT2883)

外径为8毫米的压缩配件代替软管端(订单BT2884)

Needle Valve, Bench Mounted

Categories: ColorTech BT, Needle Valves

Application: Flow regulation of all laboratory gases, including special gases such as nitrogen, oxygen, helium and hydrogen. When ordered, valve may be specially cleaned, lubricated and packaged for pure gas service. Valve is certified for natural gas service by CSA International.

Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).

Mounting: Turret base with single outlet and removable locator pins.

Valve Body: Straight pattern forged brass.

Headwork: Floating stainless steel needle and replaceable stainless steel seat.

Handle: Molded nylon hooded style handle with index disc. Handle and index are color coded and marked per EN 13792.

Inlet: Furnished with mounting shank, locknut and washer. G1/2 male inlet.

Outlet: G3/8 female outlet with removable serrated hose end.

Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 17 bar (250 PSI) nitrogen test pressure, 10 bar (150 PSI) maximum working pressure.

Optional Features

Finish Options:

Gray powder coated finish (GRY)

Polished chrome plated finish with clear epoxy coating (PCL)

Satin chrome plated finish with clear epoxy coating (SCC)

Satin nickel plated finish with clear epoxy coating (SNC)

FlowStop/Filter Options:

FlowStop volume control and shut-off valve installed in turret base (use prefix “BTFS”)

Removable filter to remove debris and impurities from media flow (use prefix “BTFL”)

Valve Options:

Integral check valve to prevent backflow (add suffix “CV”)

Outlet Options:

Angle serrated hose end in place of straight hose end (order BT2882)

Quick connect fitting in place of hose end (order BT2883)

8mm OD compression fitting in place of hose end (order BT2884)