96孔磁力架（磁架/磁分离架）

Product Description
With HON-PRO Magnetic Separator Rack you can separate magnetic beads from diverse liquid sample matrices. The magnetic beads can be used to isolate cells, proteins, nucleic acids or other biomolecules. Mix the magnetic beads product with your sample in a suitable tube. The magnetic beads usually bind to the target biomolecules within a few minutes. When the magnetic field is applied to the plate, the bead-bound biomolecules are gently drawn and retained on the plate bottom side, allowing you to easily remove the supernatant. When the magnetic field is removed, the magnetic beads can easily be dispersed, showing no residual magnetism. These magnets can be used with all types of magnetic beads. 
See .cn

l MSR-96-2
• Holds: 96 PCR microplate or 8-strip PCR tube
• Working volume: 10–200 μL.
• This magnet is small, easy to handle, and enables efficient magnetic separation in applications using small volumes. The Rack can take up to 96 samples at the same time.

Precautions
These magnets contain very strong permanent magnets. People wearing a pacemaker or any other medical magnetized implant should not use this product unless advised by a health professional; the implant could be affected or damaged by exposure to a strong magnetic field. Keep tools and objects that could be damaged by the magnetic field out of the working area. This includes, but is not restricted to, credit cards and other products containing magnetic recording devices. Keep away from delicate instruments, watches, electronic equipment, displays and monitors. The magnet may attract steel or other magnetic material with high mechanical forces. Take care during handling. Avoid contact between two magnets. Do not pull the magnets apart if contact has been made; twist off to prevent damage to the unit or fingers.

Cleaning and Disinfection
The following materials are recommended for cleaning purposes. Spray and/or wipe the magnetic rack either with 70% isopropyl alcohol, or 1% sodium hypochlorite solution (bleach). Do not submerge in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Note: Do not autoclave the magnetic.

Storage and Stability
The magnets contain high-energy Neodymium permanent magnets, and the magnetic strength will not diminish significantly during the lifetime of the product. Do not use the magnets above 50°C (122°F) and store in a cool, dry environment. Avoid prolonged exposure of the magnets to direct sunlight or artificial UV light as the surface material may become brittle.