The IC660ELB912 Micro GENI daughterboard is a network interface board from GE Fanuc. It belongs to the Genius I/O series of modules and PLC components. It features backward-compatible blocks, shared RAM, and 16 KB of memory. This micro GENI daughterboard can be interfaced with single-slot or two slot IBM PC Interface Module (PCIM) and needs a 5 Volts DC rated power source to provide the logic power. The IC660ELB912 Micro GENI daughterboard can be easily mounted by using spacers and screws. It comes with 2 status indicating LEDs to inform the operators about the status of the device, and these LED indicators are the GENI OK LED and the COMMS OK LED which show the operation and communication status of the device, respectively. The 2 LEDs can be found on the faceplate of the module which shows the operation and communication of the device.

The IC660ELB912 Micro GENI network interface board is a general-purpose I/O controller that is specifically designed for the Genius I/O system. It provides fault detection facilities for up to 30 bus modules. All the communication signals from this module are buffered through the motherboard to the host bus. It also offers effective communication. The shared RAM of the module is optimized for use with IBM personal computers. This system memory stores buffered data, I/O data, and other information. It provides the facilities for users to use remote I/O. The IC660ELB912 Micro GENI daughterboard has a 6303 microprocessor for providing optimum message writing facilities and for delivering maximum memory capacity. This daughterboard comes with a DIP switch for configuration. During installation, make sure to allow a minimum of 1/8 of an inch of space between the modules to provide the required airflow for cooling.