品牌
生产厂家厂商性质
上海市所在地
KDC型农用灌溉抗旱抢险单缸柴油机泵/上海农用柴油机水泵厂
面议KDHC型拖车移动式柴油机水泵混流泵机组/上海柴油机水泵制造商
面议KDC型柴油机防汛抗旱自吸排污泵/上海农用灌溉柴油机水泵厂
面议便携手提式柴油机泵/小型柴油机自吸泵厂家
面议KDX型柴油机应急循环水泵机组/上海移动式柴油机消应急防泵厂
面议KDZS双吸式移动柴油机排污泵组/城市防汛抢险柴油机强自吸泵厂
面议KDCM拖车式柴油机自吸排污泵机组/上海移动柴油机泵厂家
面议KDH型防汛抗洪排涝柴油机水泵/大流量柴油机混流泵厂家
面议KDH型城市防洪排涝柴油机水泵/大流量柴油机混流泵厂家
面议KDHC型拖车移动式柴油机水泵机组/上海柴油机水泵制造商
面议柴油机柴电双启动循环水泵机组/柴油机消防成套机组
面议D型矿用柴油机排水泵/高扬程大流量柴油机水泵
面议
· 产品结构特点Products design features
自动补偿平衡式双平板闸阀是一种结构新颖的闸阀产品,它具有启闭力矩小、速度快、振动小、使用寿命长、操作安全可靠等特点主要用于气、液体输送管道的切断或泄放。
Auto compensation balanced double parallel gate valve is a Producf with new st rucfu re which has small open-and-close moment,high speed,little vibration,long performance life and reliable ope ration,It is mainly applied to cut-off or discharge of gas and liauid delivery Pipelines.
系列平行式双闸阀结构特点为:
The structural features include:
阀门采用两块互相平行的闸板及其楔紧装置组成的密封结构取代传统的楔式闸阀结构。
A sealing s ructure consists of two parallel shutters and a wedge-tightening device it is taken to replace the traditional wedg eshaped gate valve structure;
阀门密封机构各零件互相分离,即使在温度变化时引起变形也仍能保证密封,且不会因高温膨胀而使闸板挤住打不开。
The components of valve sealing mechanism are separated so the sealing can retain when transmuting caused by the temperature changes,and willnot jam where swelling in high temperature;
阀门密封采用耐磨、耐腐蚀材料制成,延长了阀门的使用寿命。
The sealing surface of the valve adopts abrasion-resistant and anti-corrosive mate rials which can lengthen the performance life of the valve;
在高温、高压情况下,进口一侧闸板设计为可泄压方式,防止由于温度变化而引起的腔内压力异常升高的现象,保证使用安全。
In high temperature or Pressure,the disc on inlet side can be designed in Pressure relief style which can avoid abnormal Pressure rising in cavity caused by temperature changes,thus to ensure used safety;
全封闭结构,防护性能好,可全天候使用。
The valve adopts full-shut structure which has good protection function and can be used in allweather.
· 产品主要参数 Main parameter of the prdoucts
基本型号 Serial models | (K)Z44WH(Y)、(K)Z544WH(Y)、(K)Z644WH(Y)、(K)Z744WH(Y)、(K)Z944WH(Y) | |||
(K)Z64WH(Y)、(K)Z564WH(Y)、(K)Z664WH(Y)、(K)Z764WH(Y)、(K)Z964WH(Y) | ||||
压力等级范围 | PNl.6~10.0MPa | Classl50~600 | ||
通径范围 Drift diameter range | DN50~1000mm | 2"~40" | ||
驱动方式 Driving manner | 手轮驱动 | 齿轮动、气动、液动、电动 | ||
适用范围 Scope of application | Classl50~300 | Class400 | Class600 | 4"~36" (DNl00~900mm) |
2"~6" | 2"~4" | 2"~3" |
· 产品性能规范 Products performance specification
压力等级 | 温试验压力(MPa)Testing pressure at constant temperature(Mpa) | 适用温度Applicable temperature | 适用介质Applicab emedium | |||||
壳体试验 The shell testing | 左密封The left sealing | 右密封Right sealing | 低压气密封low pressure air tightness | 普通型0rdinary type | 抗硫型Antisulphur type | |||
公称压力 | 1.6 | 2.4 | 1.76 | 1.76 | 0.6 | -29~1 -29~121℃ | 石油、天然气、水 等非腐蚀性介质 | 含H2S、CO2 的石油、天然气、水等腐蚀性介质 |
2.5 | 3.75 | 2.75 | 2.75 | 0.6 | ||||
4.0 | 6.0 | 4.4 | 4.4 | 0.6 | ||||
6.4 | 9.6 | 7.04 | 7.04 | 0.6 | ||||
10.0 | 15.0 | 11.0 | 11.0 | 0.6 | ||||
磅级(Lb) | 150 | 3.0 | 2.2 | 2.2 | 0.6 | |||
300 | 7.5 | 5.5 | 5.5 | 0.6 | ||||
600 | 15.0 | 11.0 | 11.0 | 0.6 |
· 产品采用标准Technical specification
设计依据Design reference | GB | API | |
设计标准Design standard | JB/T5298 | API 6D ASME Bl6.34 | |
结构长度Structural length | 法兰 | GB/Tl2221 | API 6D ASME Bl6.10 |
焊接 | GB/Tl5188.1 | ||
连接法兰 | GB/T9113 | ASME Bl6.5 MSS SP44 | |
对焊端 | GB/Tl2224 | ASME Bl6.25 | |
试验和检验 | JB/T9092 | API 6D |
· 主要零件材料 Major parts material form
注:阀门主要零部件材质可根据实际工况条件或用户特殊要求设计选用。
Notes The majo r parts of the valves can be designed and selected according to actual work condition or customers’specific requirement
· 主要外形尺寸Main size of outside
感谢您访问我们的如有任何疑问.您可以致电给我们,我们将竭诚为您提供优质的服务,:。
注:当使用的场合非常重要或环境比较复杂时,请您尽量提供设计图纸和详细参数,由我们的康迪泵阀专家为您审核把关。