品牌
经销商厂商性质
北京市所在地
日本横河 300x220x427mm 15kg
DL4200 带宽300MHz (DL4100 带宽150MHz)
全四通道 采样率100MSa/s 记录长度100k 通讯接口IEEE-488 本机自带热敏打印机
The Yokogawa DL4200 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Yokogawa DL4200 oscilloscope's simple graph can l you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Bandwidth 带宽 | 300 MHz (DL4100: 150MHz) |
Number of Channels 通道数量 | 4 ch |
Simultaneous Channels | 4 ch |
Simultaneous Maximum Sampling Rate/ch | 100 MSa/s |
One ch. only max. sampling rate | 100 MSa/s |
Max. Single Shot bandwidth | 40 MHz |
Max. Record Length | 100k pt/sec |
Min. Vertical Sensitivity | 2 mV/div |
Maximum Vertical Sensitivity | 5 V/div |
Rise time | 1.167 ns (DL4100: 2.33 ns) |
Number of Bits | 10 bits |
Input Impedance | 1 MOhm |
Input Impedance (alternate) | 50 Ohm (DL4100无) |
Input Coupling | AC,DC,GND |
Maximum Input Voltage | 250 Vrms |
Maximum Input#2 (for Impedance #2) | 5 Vrms |
Main time base - lowest | 2 ns/div |
Main time base - highest | 50 s/div |
Timebase accuracy 时基精度 | 0.005 % |
Trigger Source 触发源 | External,Internal |
Trigger Modes 触发模式 | Auto,Edge,Gate,Normal,Single,TV ( NTSC,PAL,HDTV ) |
Trigger Sensitivity 触发灵敏度 | 1 mV |
Display Type 显示屏类型 | CRT |
Display Size 显示屏尺寸 | 25.4 cm |
Display modes 显示模式 | Split,Zoom |
External Video Out | Yes |